Download Qlogic Driver

Posted By admin On 12/10/21

This product corrects an issue where the FCoE UEFI driver is unable to find LUNs when multiple FCoE VLANs are enabled. This product addresses an issue where HPE QLogic NX2 network adapters fail to function properly on VMware vSphere 5.5 or later after the firmware is updated. File link File size File description; qlgcddnicnx2-7.13.103.0.10dwindows32-64.txt. 16,343: README for the Qlogic NetXtreme II 10Gb Driver for Windows.

Download Qlogic DriverDriver

Download Qlogic Drivers

Download Qlogic Driver

This component upgrades the boot BIOS and firmware of QLogic Fibre Channel host bus adapters. The OOB driver is available on the. Download the Smart Component. This Component Package contains the driver for the HPE QLogic P3P Multifunction NICs and HPE QLogic nx3 Multifunction NICs running under Microsoft Windows Server 2012 R2. Installation Instructions To ensure the integrity of your download, HPE recommends verifying your results with this SHA-256 Checksum value.

Printable version

Download Qlogic Drivers

Download Qlogic Driver

* RECOMMENDED * HPE Storage Fibre Channel Adapter Kit for the x64 QLogic Storport Driver for Microsoft Windows Server 2016

By downloading, you agree to the terms and conditions of the Hewlett Packard Enterprise Software License Agreement.
Note: Some software requires a valid warranty, current Hewlett Packard Enterprise support contract, or a license fee.

Type:Driver - Storage Fibre Channel and Fibre Channel Over Ethernet
Version:9.4.1.20(3 Aug 2020)
Operating System(s): Microsoft Windows Server 2016
Multi-part download
File name:cp042519.compsig (2.0 KB)
File name:cp042519.exe (1.4 MB)
This component contains version 9.4.1.20 of the QLogic Storport driver which provides FC-HBA driver support for HPE storage arrays.

Prerequisites:

Please consult SPOCK for a list of supported configurations available at the following link:

To ensure the integrity of your download, HPE recommends verifying your results with the following SHA-256 Checksum values:

fd6acca5e8b371747f465eaa6049aa80b2d2dfeadb8c5c24bcc8f34752edb674cp042519.compsig
a62f6fa3891b556cbe9f8ef641eddb85c1a36372ad3a76c40019a9ca6f12c20ccp042519.exe

Reboot Requirement:
Reboot is required after installation for updates to take effect and hardware stability to be maintained.

Installation:
Download the Smart Component to a directory on your hard drive and change to that directory. The downloaded file is a self-extracting executable with a filename based on the Smart Component Number.
From that drive and directory, execute the downloaded file.
Click the 'Install' button to proceed with the installation.

End User License Agreements:
HPE Software License Agreement v1
Hewlett-Packard End User License Agreement

Upgrade Requirement:
Recommended - HPE recommends users update to this version at their earliest convenience.

Important:

Release Notes:
HPE QLogic Adapters Release Notes

Fixed the following:

  • Memory dumps were not generated during a crash dump in a boot from SAN environment

Supported Devices and Features:

This driver supports the following HPE adapters:

8Gb Fibre Channel Host Bus Adapter:

  • HPE 81Q 8Gb Single Port PCIe Fibre Channel Host Bus Adapter
  • HPE 82Q 8Gb Dual Port PCIe Fibre Channel Host Bus Adapter
  • HPE 84Q 8Gb Quad Port Fibre Channel Host Bus Adapter

16Gb Fibre Channel Host Bus Adapter:

  • HPE SN1000Q 16Gb Dual Port PCIe Fibre Channel Host Bus Adapter
  • HPE SN1000Q 16Gb Single Port PCIe Fibre Channel Host Bus Adapter
  • HPE SN1100Q 16GB Dual Port PCIe Fibre Channel Host Bus Adapter
  • HPE SN1100Q 16GB Single Port PCIe Fibre Channel Host Bus Adapter

32Gb Fibre Channel Host Bus Adapter:

  • HPE SN1600Q 32Gb Single Port Fibre Channel Host Bus Adapter
  • HPE SN1600Q 32Gb Dual Port Fibre Channel Host Bus Adapter
  • HPE SN1610Q 32Gb Dual Port Fibre Channel Host Bus Adapter
  • HPE SN1610Q 32Gb Single Port Fibre Channel Host Bus Adapter

Upgrade Requirement:
Recommended - HPE recommends users update to this version at their earliest convenience.

Fixed the following:

  • Memory dumps were not generated during a crash dump in a boot from SAN environment

Release Notes:
HPE QLogic Adapters Release Notes

Fixed the following:

  • Memory dumps were not generated during a crash dump in a boot from SAN environment
Version:9.4.1.20 (3 Aug 2020)

Upgrade Requirement:
Recommended - HPE recommends users update to this version at their earliest convenience.

Fixed the following:

  • Memory dumps were not generated during a crash dump in a boot from SAN environment

Updated to version 9.4.1.20


Version:9.3.3.20(b) (20 Dec 2019)

Upgrade Requirement:
Recommended - HPE recommends users update to this version at their earliest convenience.

Fixed the following:

  • System take long time to boot and driver enable
  • Virtual Machine missing path to Logical Units (LUNs)
  • Port logout incorrect vp index used
  • On Windows 2016 Server observed Blue Screen of Death (BSOD) while doing firmware flashing using QLogic Converge Console Graphical User Interface (QCC_GUI)
  • Blue Screen of Death (BSOD) after hpqlafwupdate completes update
  • Initiator does not send Non Volatile Memory Express Process Login (NVMe PRLI) when the Target registers both Small Computer System Interface Fibre Channel Protocol (SCSI FCP) and Non Volatile Memory Express Process (NVMe) to the Fabric

Updated to version 9.3.3.20

Added support the following:

  • Non Volatile Memory Express (NVMe) is not enabled by default
  • Determine Peripheral Component Interconnect (PCI) function number from Peripheral Component Interconnect (PCI) Interrrupt pin
  • Added simplified fabric discovery code

Version:9.3.3.20 (10 Oct 2019)

Upgrade Requirement:
Recommended - HPE recommends users update to this version at their earliest convenience.

Updated to version 9.3.3.20

Added support to the following:

  • HPE SN1610Q 32Gb 2P FC HBA
  • HPE SN1610Q 32Gb 1P FC HBA

Version:9.2.9.22 (2 Apr 2019)

Upgrade Requirement:
Recommended - HPE recommends users update to this version at their earliest convenience.

Fixed the following:

  • Build environment using QSpectre compiler switch
  • Request FDMI Data Change from drivers
  • fcinfo /diag, and continual busy status failures.

Added support for following:

  • Added OEM IDs and friendly names
  • Updated RISC FW to version 8.08.01
  • Added qlservice for W2K19 Universal Driver Changes
  • Added PID addressing mode support for ElsPassThru when used to send Echo to switch

Driver version 9.2.9.22


Version:9.2.8.20(b) (27 Nov 2018)

Upgrade Requirement:
Recommended - HPE recommends users update to this version at their earliest convenience.

This driver version resolves the following :

  • Switch name server entry, Port Symbols are displayed with dots at the end
  • Non-descriptive Device name in Windows
  • Request_Driver_Plogi(Port Login) Retry Delay
  • Unexpected behavior of FC(Fibre Channel) speed - When transfer sizes above 8MB(MegaByte) are attempted, performance drops to almost zero by making mixed mode (I/O Control Block type 6 and 7) default and used IOCB (I/O Control Block) type 6 when IO(Input Output) size > 128K (> 0x20 segments)

Updated the driver to version 9.2.8.20

Added support for the following:

  • Added ABTS (Abort Sequence) handling for passthru (pass through) ELS (Extended Link Services) to prevent FW (firmware) resource leak
  • Updated RISC(Reduced Instruction Set Computer) FW (Firmware) to version 8.07.00 for 8G Adapters
  • Driver always responds to RDP (Read Diagnostic Parameter) with full payload (new version of FW (firmware) will split it into multiple frames if there is no login session)
  • Added new DPORT (Destination Port) diagnostic API (Application Program Interface) interface to return detailed codes
  • Removed Echo only restriction for ELS (Extended Link Services) pass through
  • Added GFO (Get Fabric Object) and LUN (Logical Unit) level QoS (Quality of Service) support
  • Added ELS (Extended Link Services) passthru (pass through) interface

Version:9.2.8.20 (26 Jun 2018)

Upgrade Requirement:
Recommended - HPE recommends users update to this version at their earliest convenience.

This driver version resolves the following :

  • Switch name server entry, Port Symbols are displayed with dots at the end
  • Non-descriptive Device name in Windows
  • Request_Driver_Plogi(Port Login) Retry Delay
  • Unexpected behavior of FC(Fibre Channel) speed - When transfer sizes above 8MB(MegaByte) are attempted, performance drops to almost zero by making mixed mode (I/O Control Block type 6 and 7) default and used IOCB (I/O Control Block) type 6 when IO(Input Output) size > 128K (> 0x20 segments)

Updated the driver to version 9.2.8.20

Added support for the following:

  • Added ABTS (Abort Sequence) handling for passthru (pass through) ELS (Extended Link Services) to prevent FW (firmware) resource leak
  • Updated RISC(Reduced Instruction Set Computer) FW (Firmware) to version 8.07.00 for 8G Adapters
  • Driver always responds to RDP (Read Diagnostic Parameter) with full payload (new version of FW (firmware) will split it into multiple frames if there is no login session)
  • Added new DPORT (Destination Port) diagnostic API (Application Program Interface) interface to return detailed codes
  • Removed Echo only restriction for ELS (Extended Link Services) pass through
  • Added GFO (Get Fabric Object) and LUN (Logical Unit) level QoS (Quality of Service) support
  • Added ELS (Extended Link Services) passthru (pass through) interface

Version:9.2.5.21 (5 Feb 2018)

Upgrade Requirement:
Recommended - HPE recommends users update to this version at their earliest convenience.

This driver version resolves the following :

  • Disabled Non Uniform Memory Access(NUMA) by default, made mixed mode (Input Output Control Block (IOCB) type 6 and 7) default and used Input Output Control Block (IOCB) type 6 when Input Output (IO) size > 128K (> 0x20 segments)
  • Fibre Channel (FC) speed unexpected behavior when transfer sizes above 8MB are attempted by enabling Non Uniform Memory Access (NUMA) support if number of nodes is greater than 2

Driver version 9.2.5.21


Version:9.2.5.20 (25 Sep 2017)

Upgrade Requirement:
Recommended - HPE recommends users update to this version at their earliest convenience.

This driver version resolves the following:

  • Remote Desktop Protocol (RDP) print out of speed capabilities.

  • Fibre Channel (FC) driver not completing w32 driver install process with the Fibre Channel (FC ) storage connected.

  • Windows unexpected termination on upgrading/downgrading Windows driver.

  • Windows Memory Dump generated by Multipath Input/output (MPIO) configuration.

Updated to driver version 9.2.5.20

  • Initialized Original Equipment Manufacturer (OEM) Quality of Service(QOS) memory.

Version:9.2.4.21 (12 Jul 2017)

Upgrade Requirement:
Recommended - HPE recommends users update to this version at their earliest convenience.

This driver version resolves the following:

  • Added logic to check fabric priority bit in nvram for 16Gb & 32Gb host bus adapters

  • Fixed synchronization for systems with large number of CPUs running IO on a Hyper-v VM and local server to prevent a Firmware dump

  • Added fabric priority detection per target device to improve performance on tape devices

  • Added login retries to Name Server, postponing processing Register State Change Notification (RSCN) if Name Server is logged out to prevent Path Loss issue with Brocade switch FOS upgrade

  • Fixed 16G host bus adapter incorrectly reporting that it supports 32Gb

  • Enabled Fabric Login (FLOGI) retry in firmware to better handle longer Fabric Login (FLOGI) link initialization (link up)

Driver version 9.2.4.21


Version:9.2.2.20(a) (12 Dec 2016)

Upgrade Requirement:
Recommended - HPE recommends users update to this version at their earliest convenience.

Driver version 9.2.2.20. Added support for the following devices:

HPE StoreFabric SN1600Q 32Gb Dual Port Fibre Channel Host Bus Adapter

HPE StoreFabric SN1600Q 32Gb Single Port Fibre Channel Host Bus Adapter


Version:9.2.2.20 (24 Oct 2016)

Upgrade Requirement:
Recommended - HPE recommends users update to this version at their earliest convenience.

Initial driver version 9.2.2.20


Type:Driver - Storage Fibre Channel and Fibre Channel Over Ethernet
Version:9.4.1.20(3 Aug 2020)
Operating System(s):
Microsoft Windows Server 2016

Description

This component contains version 9.4.1.20 of the QLogic Storport driver which provides FC-HBA driver support for HPE storage arrays.

Enhancements

Installation Instructions

Prerequisites:

Please consult SPOCK for a list of supported configurations available at the following link:

To ensure the integrity of your download, HPE recommends verifying your results with the following SHA-256 Checksum values:

fd6acca5e8b371747f465eaa6049aa80b2d2dfeadb8c5c24bcc8f34752edb674cp042519.compsig
a62f6fa3891b556cbe9f8ef641eddb85c1a36372ad3a76c40019a9ca6f12c20ccp042519.exe

Reboot Requirement:
Reboot is required after installation for updates to take effect and hardware stability to be maintained.

Installation:
Download the Smart Component to a directory on your hard drive and change to that directory. The downloaded file is a self-extracting executable with a filename based on the Smart Component Number.
From that drive and directory, execute the downloaded file.
Click the 'Install' button to proceed with the installation.

Release Notes

End User License Agreements:
HPE Software License Agreement v1
Hewlett-Packard End User License Agreement

Upgrade Requirement:
Recommended - HPE recommends users update to this version at their earliest convenience.

Important:

Release Notes:
HPE QLogic Adapters Release Notes

Fixed the following:

  • Memory dumps were not generated during a crash dump in a boot from SAN environment

Supported Devices and Features:

This driver supports the following HPE adapters:

8Gb Fibre Channel Host Bus Adapter:

  • HPE 81Q 8Gb Single Port PCIe Fibre Channel Host Bus Adapter
  • HPE 82Q 8Gb Dual Port PCIe Fibre Channel Host Bus Adapter
  • HPE 84Q 8Gb Quad Port Fibre Channel Host Bus Adapter

16Gb Fibre Channel Host Bus Adapter:

  • HPE SN1000Q 16Gb Dual Port PCIe Fibre Channel Host Bus Adapter
  • HPE SN1000Q 16Gb Single Port PCIe Fibre Channel Host Bus Adapter
  • HPE SN1100Q 16GB Dual Port PCIe Fibre Channel Host Bus Adapter
  • HPE SN1100Q 16GB Single Port PCIe Fibre Channel Host Bus Adapter

32Gb Fibre Channel Host Bus Adapter:

  • HPE SN1600Q 32Gb Single Port Fibre Channel Host Bus Adapter
  • HPE SN1600Q 32Gb Dual Port Fibre Channel Host Bus Adapter
  • HPE SN1610Q 32Gb Dual Port Fibre Channel Host Bus Adapter
  • HPE SN1610Q 32Gb Single Port Fibre Channel Host Bus Adapter

Fixes

Upgrade Requirement:
Recommended - HPE recommends users update to this version at their earliest convenience.

Fixed the following:

  • Memory dumps were not generated during a crash dump in a boot from SAN environment

Important

Release Notes:
HPE QLogic Adapters Release Notes

Fixed the following:

  • Memory dumps were not generated during a crash dump in a boot from SAN environment

Revision History

Version:9.4.1.20 (3 Aug 2020)

Upgrade Requirement:
Recommended - HPE recommends users update to this version at their earliest convenience.

Fixed the following:

  • Memory dumps were not generated during a crash dump in a boot from SAN environment

Updated to version 9.4.1.20


Version:9.3.3.20(b) (20 Dec 2019)

Upgrade Requirement:
Recommended - HPE recommends users update to this version at their earliest convenience.

Fixed the following:

  • System take long time to boot and driver enable
  • Virtual Machine missing path to Logical Units (LUNs)
  • Port logout incorrect vp index used
  • On Windows 2016 Server observed Blue Screen of Death (BSOD) while doing firmware flashing using QLogic Converge Console Graphical User Interface (QCC_GUI)
  • Blue Screen of Death (BSOD) after hpqlafwupdate completes update
  • Initiator does not send Non Volatile Memory Express Process Login (NVMe PRLI) when the Target registers both Small Computer System Interface Fibre Channel Protocol (SCSI FCP) and Non Volatile Memory Express Process (NVMe) to the Fabric

Updated to version 9.3.3.20

Added support the following:

  • Non Volatile Memory Express (NVMe) is not enabled by default
  • Determine Peripheral Component Interconnect (PCI) function number from Peripheral Component Interconnect (PCI) Interrrupt pin
  • Added simplified fabric discovery code

Version:9.3.3.20 (10 Oct 2019)

Upgrade Requirement:
Recommended - HPE recommends users update to this version at their earliest convenience.

Updated to version 9.3.3.20

Added support to the following:

  • HPE SN1610Q 32Gb 2P FC HBA
  • HPE SN1610Q 32Gb 1P FC HBA

Version:9.2.9.22 (2 Apr 2019)

Upgrade Requirement:
Recommended - HPE recommends users update to this version at their earliest convenience.

Fixed the following:

  • Build environment using QSpectre compiler switch
  • Request FDMI Data Change from drivers
  • fcinfo /diag, and continual busy status failures.

Added support for following:

  • Added OEM IDs and friendly names
  • Updated RISC FW to version 8.08.01
  • Added qlservice for W2K19 Universal Driver Changes
  • Added PID addressing mode support for ElsPassThru when used to send Echo to switch

Driver version 9.2.9.22


Version:9.2.8.20(b) (27 Nov 2018)

Upgrade Requirement:
Recommended - HPE recommends users update to this version at their earliest convenience.

This driver version resolves the following :

  • Switch name server entry, Port Symbols are displayed with dots at the end
  • Non-descriptive Device name in Windows
  • Request_Driver_Plogi(Port Login) Retry Delay
  • Unexpected behavior of FC(Fibre Channel) speed - When transfer sizes above 8MB(MegaByte) are attempted, performance drops to almost zero by making mixed mode (I/O Control Block type 6 and 7) default and used IOCB (I/O Control Block) type 6 when IO(Input Output) size > 128K (> 0x20 segments)

Updated the driver to version 9.2.8.20

Added support for the following:

  • Added ABTS (Abort Sequence) handling for passthru (pass through) ELS (Extended Link Services) to prevent FW (firmware) resource leak
  • Updated RISC(Reduced Instruction Set Computer) FW (Firmware) to version 8.07.00 for 8G Adapters
  • Driver always responds to RDP (Read Diagnostic Parameter) with full payload (new version of FW (firmware) will split it into multiple frames if there is no login session)
  • Added new DPORT (Destination Port) diagnostic API (Application Program Interface) interface to return detailed codes
  • Removed Echo only restriction for ELS (Extended Link Services) pass through
  • Added GFO (Get Fabric Object) and LUN (Logical Unit) level QoS (Quality of Service) support
  • Added ELS (Extended Link Services) passthru (pass through) interface

Version:9.2.8.20 (26 Jun 2018)

Upgrade Requirement:
Recommended - HPE recommends users update to this version at their earliest convenience.

This driver version resolves the following :

  • Switch name server entry, Port Symbols are displayed with dots at the end
  • Non-descriptive Device name in Windows
  • Request_Driver_Plogi(Port Login) Retry Delay
  • Unexpected behavior of FC(Fibre Channel) speed - When transfer sizes above 8MB(MegaByte) are attempted, performance drops to almost zero by making mixed mode (I/O Control Block type 6 and 7) default and used IOCB (I/O Control Block) type 6 when IO(Input Output) size > 128K (> 0x20 segments)

Updated the driver to version 9.2.8.20

Added support for the following:

  • Added ABTS (Abort Sequence) handling for passthru (pass through) ELS (Extended Link Services) to prevent FW (firmware) resource leak
  • Updated RISC(Reduced Instruction Set Computer) FW (Firmware) to version 8.07.00 for 8G Adapters
  • Driver always responds to RDP (Read Diagnostic Parameter) with full payload (new version of FW (firmware) will split it into multiple frames if there is no login session)
  • Added new DPORT (Destination Port) diagnostic API (Application Program Interface) interface to return detailed codes
  • Removed Echo only restriction for ELS (Extended Link Services) pass through
  • Added GFO (Get Fabric Object) and LUN (Logical Unit) level QoS (Quality of Service) support
  • Added ELS (Extended Link Services) passthru (pass through) interface

Version:9.2.5.21 (5 Feb 2018)

Upgrade Requirement:
Recommended - HPE recommends users update to this version at their earliest convenience.

This driver version resolves the following :

  • Disabled Non Uniform Memory Access(NUMA) by default, made mixed mode (Input Output Control Block (IOCB) type 6 and 7) default and used Input Output Control Block (IOCB) type 6 when Input Output (IO) size > 128K (> 0x20 segments)
  • Fibre Channel (FC) speed unexpected behavior when transfer sizes above 8MB are attempted by enabling Non Uniform Memory Access (NUMA) support if number of nodes is greater than 2

Driver version 9.2.5.21


Version:9.2.5.20 (25 Sep 2017)

Upgrade Requirement:
Recommended - HPE recommends users update to this version at their earliest convenience.

This driver version resolves the following:

  • Remote Desktop Protocol (RDP) print out of speed capabilities.

  • Fibre Channel (FC) driver not completing w32 driver install process with the Fibre Channel (FC ) storage connected.

  • Windows unexpected termination on upgrading/downgrading Windows driver.

  • Windows Memory Dump generated by Multipath Input/output (MPIO) configuration.

Updated to driver version 9.2.5.20

  • Initialized Original Equipment Manufacturer (OEM) Quality of Service(QOS) memory.

Version:9.2.4.21 (12 Jul 2017)

Upgrade Requirement:
Recommended - HPE recommends users update to this version at their earliest convenience.

This driver version resolves the following:

  • Added logic to check fabric priority bit in nvram for 16Gb & 32Gb host bus adapters

  • Fixed synchronization for systems with large number of CPUs running IO on a Hyper-v VM and local server to prevent a Firmware dump

  • Added fabric priority detection per target device to improve performance on tape devices

  • Added login retries to Name Server, postponing processing Register State Change Notification (RSCN) if Name Server is logged out to prevent Path Loss issue with Brocade switch FOS upgrade

  • Fixed 16G host bus adapter incorrectly reporting that it supports 32Gb

  • Enabled Fabric Login (FLOGI) retry in firmware to better handle longer Fabric Login (FLOGI) link initialization (link up)

Driver version 9.2.4.21


Version:9.2.2.20(a) (12 Dec 2016)

Upgrade Requirement:
Recommended - HPE recommends users update to this version at their earliest convenience.

Driver version 9.2.2.20. Added support for the following devices:

HPE StoreFabric SN1600Q 32Gb Dual Port Fibre Channel Host Bus Adapter

HPE StoreFabric SN1600Q 32Gb Single Port Fibre Channel Host Bus Adapter


Version:9.2.2.20 (24 Oct 2016)

Upgrade Requirement:
Recommended - HPE recommends users update to this version at their earliest convenience.

Initial driver version 9.2.2.20


Legal Disclaimer: Products sold prior to the November 1, 2015 separation of Hewlett-Packard Company into Hewlett Packard Enterprise Company and HP Inc. may have older product names and model numbers that differ from current models.