Drivers Olympus USB Devices

Posted By admin On 24/09/21
  1. Drivers Olympus Usb Devices Dongle
  2. Drivers Olympus Usb Devices 3.0
  • August 22, 2019 2.9.8

    Device driver for all The Imaging Source USB cameras except the 33U, 37U, 38U and AFU auto focus series.

    Version

    2.9.8

    Released

    August 22, 2019

    Type

    ZIP

    Filesize

    3MB

    Requirements

    • Intel Core i3 or similar, 2 GB RAM
    • USB 3.0 controller
    • Graphics card with 24 or 32 bit
    • Windows 7 (32 & 64 bit), Windows 8 (32 & 64 bit), Windows 10 (32 & 64 bit)
    • DirectX 9.0c or higher

    Changelog

    1. Added several internal interfaces for particular sensors (J003).
  • January 25, 2019 2.9.6

    Device driver for all The Imaging Source USB cameras except the 33U, 37U, 38U and AFU auto focus series.

    Version

    2.9.6

    Released

    January 25, 2019

    Type

    ZIP

    Filesize

    3MB

    Requirements

    • Intel Core i3 or similar, 2 GB RAM
    • USB 3.0 controller
    • Graphics card with 24 or 32 bit
    • Windows 7 (32 & 64 bit), Windows 8 (32 & 64 bit), Windows 10 (32 & 64 bit)
    • DirectX 9.0c or higher

    Changelog

    1. Added missing Tonemapping Auto property.
  • May 4, 2018 2.9.5

    Device driver for all The Imaging Source USB cameras except the 33U, 37U, 38U and AFU auto focus series.

    Version

    2.9.5

    Released

    May 4, 2018

    Type

    ZIP

    Filesize

    3MB

    Requirements

    • Intel Core i3 or similar, 2 GB RAM
    • USB 3.0 controller
    • Graphics card with 24 or 32 bit
    • Windows 7 (32 & 64 bit), Windows 8 (32 & 64 bit), Windows 10 (32 & 64 bit)
    • DirectX 9.0c or higher

    Changelog

    1. Enabled tonemapping for 8bit video formats, e.g. Y800, RGB24 and RGB32.
  • November 21, 2017 2.9.4

    Device driver for all The Imaging Source USB cameras except the 33U, 37U, 38U and AFU auto focus series.

    Version

    2.9.4

    Released

    November 21, 2017

    Type

    ZIP

    Filesize

    3.2MB

    Requirements

    • Intel Core i3 or similar, 2 GB RAM
    • USB 3.0 or USB 2.0 controller (depends upon camera model)
    • Graphics card with 24 or 32 bit
    • Windows XP, Windows Vista, Windows 7 (32 & 64 bit), Windows 8 (32 & 64 bit), Windows 10 (32 & 64 bit)
    • DirectX 9.0c or higher

    Changelog

    1. Repaired not working J003 mono sensor pattern fix on particular video formats.
    2. This driver version is the last that works in Windows XP.
  • January 9, 2017 2.9.3

    Device driver for all The Imaging Source USB cameras except the 33U, 37U, 38U and AFU auto focus series.

    Version

    2.9.3

    Released

    January 9, 2017

    Type

    ZIP

    Filesize

    3.2MB

    Requirements

    • Intel Core i3 or similar, 2 GB RAM
    • USB 3.0 or USB 2.0 controller (depends upon camera model)
    • Graphics card with 24 or 32 bit
    • Windows XP, Windows Vista, Windows 7 (32 & 64 bit), Windows 8 (32 & 64 bit), Windows 10 (32 & 64 bit)
    • DirectX 9.0c or higher

    Changelog

    1. Added a pattern fix for J003 mono sensors.
  • January 9, 2017 2.9.1

    Device driver for all The Imaging Source USB cameras except the 33U, 37U, 38U and AFU auto focus series.

    Version

    2.9.1

    Released

    January 9, 2017

    Type

    ZIP

    Filesize

    3.2MB

    Requirements

    • Intel Core i3 or similar, 2 GB RAM
    • USB 3.0 or USB 2.0 controller (depends upon camera model)
    • Graphics card with 24 or 32 bit
    • Windows XP, Windows Vista, Windows 7 (32 & 64 bit), Windows 8 (32 & 64 bit), Windows 10 (32 & 64 bit)
    • DirectX 9.0c or higher

    Changelog

    1. Fixed the driver signature Code 52 error on new Windows 10 v1607 systems.
  • January 15, 2016 2.8.9

    Device driver for all The Imaging Source USB cameras except the 33U, 37U, 38U and AFU auto focus series.

    Version

    2.8.9

    Released

    January 15, 2016

    Type

    ZIP

    Filesize

    2.3MB

    Requirements

    • Intel Core i3 or similar, 2 GB RAM
    • USB 3.0 or USB 2.0 controller (depends upon camera model)
    • Graphics card with 24 or 32 bit
    • Windows XP, Windows Vista, Windows 7 (32 & 64 bit), Windows 8 (32 & 64 bit), Windows 10 (32 & 64 bit)
    • DirectX 9.0c or higher

    Changelog

    1. Changed certificates so that the driver can also be installed in Vista.
  • November 9, 2015 2.8.7

    Device driver for all The Imaging Source USB cameras except the 33U, 37U, 38U and AFU auto focus series.

    Version

    2.8.7

    Released

    November 9, 2015

    Type

    ZIP

    Filesize

    2.3MB

    Requirements

    • Intel Core i3 or similar, 2 GB RAM
    • USB 3.0 or USB 2.0 controller (depends upon camera model)
    • Graphics card with 24 or 32 bit
    • Windows XP, Windows Vista, Windows 7 (32 & 64 bit), Windows 8 (32 & 64 bit), Windows 10 (32 & 64 bit)
    • DirectX 9.0c or higher

    Changelog

    1. Fixed an error which can appear when using sharpness on older CPUs.
  • October 20, 2015 2.8.5

    Device driver for all The Imaging Source USB cameras except the 33U, 37U, 38U and AFU auto focus series.

    Version

    2.8.5

    Released

    October 20, 2015

    Type

    ZIP

    Filesize

    2.3MB

    Requirements

    • Intel Core i3 or similar, 2 GB RAM
    • USB 3.0 or USB 2.0 controller (depends upon camera model)
    • Graphics card with 24 or 32 bit
    • Windows XP, Windows Vista, Windows 7 (32 & 64 bit), Windows 8 (32 & 64 bit), Windows 10 (32 & 64 bit)
    • DirectX 9.0c or higher

    Changelog

    1. Fixed a bug which can appear on LivePause call.
  • July 15, 2015 2.8.0

    Device driver for all The Imaging Source USB cameras except the 33U, 37U, 38U and AFU auto focus series.

    Version

    2.8.0

    Released

    July 15, 2015

    Type

    ZIP

    Filesize

    2.4MB

    Requirements

    • Intel Core i3 or similar, 2 GB RAM
    • USB 3.0 or USB 2.0 controller (depends upon camera model)
    • Graphics card with 24 or 32 bit
    • Windows XP, Windows Vista, Windows 7 (32 & 64 bit), Windows 8 (32 & 64 bit), Windows 10 (32 & 64 bit)
    • DirectX 9.0c or higher

    Changelog

    1. Support of DFK ECU010-L34 with serial number property.
    2. Added tone mapping.
  • February 17, 2015 2.7.33

    Device driver for all The Imaging Source USB cameras except the 33U, 37U, 38U and AFU auto focus series.

    Version

    2.7.33

    Released

    February 17, 2015

    Type

    ZIP

    Filesize

    2.4MB

    Requirements

    • Intel Core i3 or similar, 2 GB RAM
    • USB 3.0 or USB 2.0 controller (depends upon camera model)
    • Graphics card with 24 or 32 bit
    • Windows XP, Windows Vista, Windows 7 (32 & 64 bit), Windows 8 (32 & 64 bit), Windows 10 (32 & 64 bit)
    • DirectX 9.0c or higher

    Changelog

    1. The Auto Focus Onepush Running flag now resets correctly after the auto focus has finished.
  • February 5, 2015 2.7.32

    Device driver for all The Imaging Source USB cameras except the 33U, 37U, 38U and AFU auto focus series.

    Version

    2.7.32

    Released

    February 5, 2015

    Type

    ZIP

    Filesize

    2.4MB

    Requirements

    • Intel Core i3 or similar, 2 GB RAM
    • USB 3.0 or USB 2.0 controller (depends upon camera model)
    • Graphics card with 24 or 32 bit
    • Windows XP, Windows Vista, Windows 7 (32 & 64 bit), Windows 8 (32 & 64 bit), Windows 10 (32 & 64 bit)
    • DirectX 9.0c or higher

    Changelog

    1. Video format MJPG (2592x1944) of DFK AFU050-L34 camera can now be used.
  • January 14, 2015 2.7.31

    Device driver for all The Imaging Source USB cameras except the 33U, 37U, 38U and AFU auto focus series.

    Version

    2.7.31

    Released

    January 14, 2015

    Type

    ZIP

    Filesize

    2.3MB

    Requirements

    • Intel Core i3 or similar, 2 GB RAM
    • USB 3.0 or USB 2.0 controller (depends upon camera model)
    • Graphics card with 24 or 32 bit
    • Windows XP, Windows Vista, Windows 7 (32 & 64 bit), Windows 8 (32 & 64 bit), Windows 10 (32 & 64 bit)
    • DirectX 9.0c or higher

    Changelog

    1. Support for IMX236 based cameras.
    2. Support for RGB64 color formats.
    3. Several performance improvements.
  • June 6, 2014 2.7.9.1152

    Device driver for all The Imaging Source USB cameras except the 33U, 37U, 38U and AFU auto focus series.

    Version

    2.7.9.1152

    Released

    June 6, 2014

    Type

    ZIP

    Filesize

    2.1MB

    Requirements

    • Intel Core i3 or similar, 2 GB RAM
    • USB 3.0 or USB 2.0 controller (depends upon camera model)
    • Graphics card with 24 or 32 bit
    • Windows XP, Windows Vista, Windows 7 (32 & 64 bit), Windows 8 (32 & 64 bit), Windows 10 (32 & 64 bit)
    • DirectX 9.0c or higher

    Changelog

    1. Added new properties: Brightness, sharpness, de-noise, saturation, hue and contrast.
    2. Added new property: Highlight reduction.
    3. Added new property: White balance temperature controls.
    4. Pixelfix for Y16 cameras now works as expected.
    5. VideoControl_ExternalTrigger (DirectShow property) can now be set as expected.
  • January 1, 2014 2.6.5.1014

    Device driver for all The Imaging Source USB cameras except the 33U, 37U, 38U and AFU auto focus series.

    Version

    2.6.5.1014

    Released

    January 1, 2014

    Type

    ZIP

    Filesize

    1.9MB

    Requirements

    • Intel Pentium IV or similar, 2 GB RAM
    • USB 3.0 or USB 2.0 controller (depends upon camera model)
    • Graphics card with 24 or 32 bit
    • Windows XP, Windows Vista, Windows 7 (32 & 64 bit), Windows 8 (32 & 64 bit)
    • DirectX 9.0c or higher

    Changelog

    1. Fixed missing auto-gain for DFK AFU130.
    2. Fixed focus when start value is out of auto_focus_range.
    3. Fixed problem with AUTOFOCUS_ROI_RIGHT: minimum possibly wrong.
    4. Fixed auto focus ROI not working for 21*UC cameras.
    5. Fixed crash on load/connect with certain cameras 22/72xUC.
    6. Fixed previous exposure settings not being loaded on reconnect.
    7. Complete reworking of internal property system.
    8. Fixed Windows XP driver load crash.
    9. Fixed drop counter to be accessible from DirectShow.
    10. Fixed Windows 8 problem with certain video formats needing converters with standard DirectShow filters (e.g. Y800, capturing to an Y800 avi file was not possible).
    11. Fixed a problem with Windows 8 usbxhci driver not allowing transfers larger then 4 MB.
  • February 26, 2013 2.4.14.851

    Device driver for all The Imaging Source USB cameras except the 33U, 37U, 38U and AFU auto focus series.

    Version

    2.4.14.851

    Released

    February 26, 2013

    Type

    ZIP

    Filesize

    1.9MB

    Requirements

    • Intel Pentium IV or similar, 2 GB RAM
    • USB 3.0 or USB 2.0 controller (depends upon camera model)
    • Graphics card with 24 or 32 bit
    • Windows XP, Windows Vista, Windows 7 (32 & 64 bit), Windows 8 (32 & 64 bit)
    • DirectX 9.0c or higher

    Changelog

    1. WHQL certification.

You can use locally attached USB devices, such as thumb flash drives, cameras, and printers, from a remote desktop. This feature is called USB redirection.

Olympus dvr usb device RecMic series features five buttons — F1 to Drv on the front, and one on the back — that can be freely assigned to various functions to suit a particular preference or recording environment. Professional desktop dictation meets unrivalled reliability. The USB device appears in the desktop. A USB device might take up to 20 seconds to appear in the desktop. The first time you connect the device to the desktop you might be prompted to install drivers. If the USB device does not appear in the desktop after several minutes, disconnect and reconnect the device to the client computer. Let us know what you're looking for by filling out the form below. Contact Us; Contact Us; Custom Financing Solutions; Same Day Shipping Program; Olympus Scientific Cloud; Olympus. Olympus Usb Media Adapter Device Driver free download - USB Video Device, USB Audio ASIO Driver, Linksys Compact Wireless-G USB Adapter, and many more programs. The USB ports are not recognizing the phone or any device. I tried plugging in my Olympus Stylus camera too and it doesn't work either. Both the phone and camera previously worked on this laptop using these USB ports. In device manager both the Nokia phone and Olympus camera show up but are shaded and you cant open either.

When you use this feature, most USB devices that are attached to the local client system become available from a menu in Horizon Client. You use the menu to connect and disconnect the devices.

Note: With View Agent 6.1 or later, or Horizon Agent 7.0 or later, you can also redirect locally connected USB thumb flash drives and hard disks for use in published desktops and remote applications. Other types of USB devices, including other types of storage devices, such as security storage drives and USB CD-ROM, are not supported in published desktops and applications. With Horizon Agent 7.0.2 or later, published desktops and applications can support more generic USB devices, including TOPAZ Signature Pad, Olympus Dictation Foot pedal, and Wacom signature pad. Other types of USB devices, including security storage drivers and USB CD-ROM drives, are not supported in published desktops and applications.

Drivers Olympus Usb Devices Dongle

Using USB devices with remote desktops has the following limitations:

  • When you access a USB device from a menu in Horizon Client and use the device in a remote desktop, you cannot access the device on the local computer.
  • USB devices that do not appear in the menu, but are available in a remote desktop, include human interface devices such as keyboards and pointing devices. The remote desktop and the local computer use these devices at the same time. Interaction with these devices can sometimes be slow because of network latency.
  • Large USB disk drives can take several minutes to appear in the desktop.
  • Some USB devices require specific drivers. If a required driver is not already installed on a remote desktop, you might be prompted to install it when you connect the USB device to the remote desktop.
  • If you plan to attach USB devices that use MTP drivers, such as Android-based Samsung smart phones and tablets, configure Horizon Client so that it automatically connects USB devices to your remote desktop. Otherwise, if you try to manually redirect the USB device by using a menu item, the device is not redirected unless you unplug the device and then plug it in again.
  • Do not connect to scanners by using the Connect USB Device menu. To use a scanner device, use the scanner redirection feature. This feature is available for Horizon Client when used with View Agent 6.0.2 or later or Horizon Agent 7.0 or later. See Using Scanners.
  • Webcams are not supported for USB redirection using the Connect USB Device menu. To use a webcam or audio input device, you must use the Real-Time Audio-Video feature. See Using the Real-Time Audio-Video Feature for Webcams and Microphones.
  • The redirection of USB audio devices depends on the state of the network and is not reliable. Some devices require a high data throughput even when they are idle. Audio input and output devices work well with the Real-Time Audio-Video feature. You do not need to use USB redirection for those devices.
  • You cannot format a redirected USB drive in a published desktop on an RDS host unless you connect to the remote desktop as an administrator user.

You can connect USB devices to a remote desktop either manually or automatically.

Note: Do not redirect USB devices such as USB Ethernet devices and touch screen devices to the remote desktop. If you redirect a USB Ethernet device, your client system loses network connectivity. If you redirect a touch screen device, the remote desktop receives touch input but not keyboard input. If you have set your virtual desktop to autoconnect USB devices, you can configure a policy to exclude specific devices.
  • To use USB devices with a remote desktop, a Horizon administrator must enable the USB feature for the remote desktop.
  • When Horizon Client was installed, the USB Redirection component must have been installed. If you did not include this component in the installation, uninstall the client and run the installer again to include the USB Redirection component.
Devices

Procedure

  • Manually connect the USB device to a remote desktop.
    1. Connect the USB device to your local client system.
    2. From the VMware Horizon Client menu bar, click Connect USB Device.
    3. Select the USB device.
    The device is manually redirected from the local system to the remote desktop.
  • Connect the USB device to a remote hosted application.
    1. In the desktop and application selector window, open the remote application.
      The name of the application is the name that your administrator has configured for the application.
    2. In the desktop and application selector window, right-click the application icon and select Settings.
    3. In the left pane, select USB Devices.
    4. In the right pane, select the USB device and click Connect.
    5. Select the application, and click OK.
      Note: The name of the application in the list comes from the application itself and might not match the application name that your administrator configured to appear in the desktop and application selector window.
      You can now use the USB device with the remote application. After you close the application, the USB device is not released right away.
    6. When you are finished using the application, to release the USB device so that you can access it from your local system, in the desktop and application selector window, open the Settings window again, select USB Devices, and select Disconnect.
  • Configure Horizon Client to connect USB devices automatically to the remote desktop when you plug them in to the local system.
    Use the autoconnect feature if you plan to connect devices that use MTP drivers, such as Android-based Samsung smart phones and tablets.
    1. Before you plug in the USB device, start Horizon Client and connect to a remote desktop.
    2. From the VMware Horizon Client menu bar, select Connect USB Device > Autoconnect USB Devices when Inserted.
    3. Plug in the USB device.
    USB devices that you connect to your local system after you start Horizon Client are redirected to the remote desktop.
  • Configure Horizon Client to connect USB devices automatically to the remote desktop when Horizon Client starts.
    1. From the VMware Horizon Client menu bar, select Connect USB Device > Autoconnect USB Devices at Startup.
    2. Plug in the USB device and restart Horizon Client.
    USB devices that are connected to the local system when you start Horizon Client are redirected to the remote desktop.

The USB device appears in the desktop. A USB device might take up to 20 seconds to appear in the desktop. The first time you connect the device to the desktop you might be prompted to install drivers.

Drivers Olympus Usb Devices 3.0

If the USB device does not appear in the desktop after several minutes, disconnect and reconnect the device to the client computer.