NEC Printers Driver Download For Windows

Posted By admin On 13/10/21

NEC projector models with a LAN or RS232 connection. NEC large-screen display series: MA, M, ME, UN, UX, BT, X, P, V, C, CB and E series(E series is only models with a built-in LAN connection). The following large-screen display series is exempt from support model. NEC SuperScript 1400 Series Printer Driver Download. NEC SuperScript 1400 Series Printer Driver for Windows 9x/ME/2000. You can download by either clicking the 'Download' button. From the File Download window, verify that 'Save' is selected and click OK. Do not rename the file you're downloading, it may cause installation problems. Windows device driver information for NEC SuperScript 870. The NEC SuperScript 870 is a printer that is characterized by its high speeds of 8 pages per minute and 6000 pages per month. It has a high resolution of 600 by 600 and its image processing image drives it at 60MHz.

-->

The Microsoft Standard Driver for 3D Printers allows developers to easily make their printer compatible with Windows 10. Any printer that uses Microsoft OS descriptors can be recognized as a compatible 3D printer. Using a concrete example, this article will show how to create a firmware that allows a device to be recognized as a 3D printer by Windows 10 and communicate its print capabilities.

Introduction

The Microsoft Standard Driver relieves the burden of writing their own driver from independent hardware vendors (IHVs) who want their 3D printers to be compatible with Windows 10. Versions of Windows that are aware of Microsoft OS descriptors use control requests to retrieve the information and use it to install and configure the device without requiring any user interaction.

The general process to get a 3D printer working on Windows 10 includes the following steps:

  1. Compatible ID. The independent hardware vendor (IHV) has to include the '3D Print' compatible ID in the firmware of the printer. This allows the device to be recognized as a 3D printer.

  2. Standard Driver. Once the device is plugged in, Windows Update will download the 3D print standard driver and detect the current device as a 3D printer that uses a default configuration.

  3. Extended properties descriptor. Several base configurations for 3D printers are made available as part of the standard driver. A developer can therefore choose a base configuration that matches their 3D printer. On top of choosing a base configuration, a developer can override some of the properties to better match their 3D printer and include them in the new firmware.

  4. Plug and play. Once the firmware is burned in the flash memory of the 3D printer, whenever a user plugs it into a Windows 10 machine, the standard driver will automatically be downloaded and will use the custom print capabilities that the developer has chosen.

In the following sections, we will illustrate each of these steps using a concrete example.

NEC Printers Driver Download For Windows

For more information, see Microsoft OS Descriptors.

Compatible ID

To specify to the Windows operating system that we are currently using a 3D printer, we have to use the right compatible ID. The list of Microsoft Compatible ID are available at Microsoft OS Descriptors.

The compatible ID for a 3D printer is shown in the following table:

Compatible IDSub-compatible IDDescription
'3DPRINT'
(0x33 0x44 0x50 0x52 0x49 0x4E 0x54 0x00)
VariesMS3DPRINT G-Code Printer

In the header file that is included in the 3D printer firmware, the IHV must specify the Compatible ID as shown here:

This line in the code above is the compatible ID of a 3D Printer:

'3', 'D', 'P', 'R', 'I', 'N', 'T', 0x00, // compatibleID ('3DPRINT')

With this specific configuration, IHVs can compile their firmware and flash the device. Then when the device is plugged in, the 3D Print Standard Driver will automatically get downloaded from Windows Update.

At this stage the printer is using the standard driver default configuration, the parameters used by the default configuration are accessible in the folder %SYSTEMROOT%System32MS3DPrint in the file StandardGCode.xml. Additionally, a developer can chose to use a different base configuration, a list of base configurations are available in the same folder %SYSTEMROOT%System32MS3DPrint. This list is regularly populated with new configuration as new 3D printers emerge on the market.

Extended Properties OS Feature Descriptor

As stated in the above section, IHVs have access to several base configurations. This has the advantage of minimizing the amount of information that has to be stored in the printer’s flash memory. Developers can inspect the base configurations made available and choose the one that is the closest to their printers. In this example we are going to choose the SD card base configuration and override some of the properties with the parameters below:

Download
ParametersValue
Job3DOutputAreaWidth250000
Job3DOutputAreaDepth260000
Job3DOutputAreaHeight270000
Filamentdiameter2850

For more information about these parameters, please refer to the MS3DPrint Standard G-Code Driver.docx document in the 3D Printing SDK (MSI download) documentation.

To specify which base configuration to use and which parameters to override, the developer has to specify it through the Extended Properties OS Feature Descriptor as shown here:

Information regarding the extended properties OS feature descriptor are in the OS_Desc_Ext_Prop.doc file. See Microsoft OS Descriptors for more information.

Printers

Verifying the print capabilities

Once the device has the firmware burned in flash memory , the device will automatically be detected by Windows 10 and the print capabilities will be stored in registry.

It is very important that the IHV changes the VID/PID of the device to their own. You should never use the Vendor ID (VID) or Product ID (PID) of another existing device as the operating system will not be able to detect the device properly as the VID and PID take priority over the OS descriptor.

If the device has been properly installed, the device should be listed in Devices and Printers.

In the Device Manager, the matching device id and the compatible id can be verified.

The USB driver properties can be obtained by visiting the registry at HKEY_LOCAL_MACHINESYSTEMCurrentControlSetEnumUSB.

The 3D Print driver properties can be obtained by visiting the registry at HKEY_LOCAL_MACHINESYSTEMCurrentControlSetControlPrintPrinters.

Additional resources

For more information, see the following documents and resources:

You can also contact the Microsoft 3D Printing team at Ask 3D Printing Questions ([email protected]).

Category: Printer
Manufacturer: NEC
Caution Level: Intermediate
Download File Size: 2.6Mb
Operating System: Windows XP, Windows 2003, Windows 2000
Latest Version / Release Date: 5.1.2600.2180 / 28 Apr 2009

Windows device driver information for NEC SuperScript 870

The NEC SuperScript 870 is a printer that is characterized by its high speeds of 8 pages per minute and 6000 pages per month. It has a high resolution of 600 by 600 and its image processing image drives it at 60MHz. To allow for quality printing of a business nature and sharing, this printer is equipped with a Base-T network of 10/100. It uses a font type of 78 type 1 and it has a memory of 2MB enabled by the software for Adobe Memory Booster and a Random Access Memory {RAM} of 16. PCL 4.5 and Adobe PrintGear are the languages this printer understands. It comes with a manufacturer's warranty of two years and it supports Windows 95, 98, NT 4.0 and DOS printer drivers. It uses a Bi-Directional parallel type of interface. Its paper handling is manual and documents are fed singly.

Outdated Drivers?

Unless you update your drivers regularly you may face hardware performance issues.

Nec Printers Driver Download For Windows Xp

To check your drivers you should manually verify every device on your system for driver updates

NEC Printers Driver Download For Windows

Nec Printers Driver Download For Windows 7

Before installing the NEC SuperScript 870 printer, people should make sure that their computers meet certain configurations detailed in the installation manual. The computer should have 8MB of Random Access Memory {RAM} which speeds up the performance. The printer is then unpacked and the cord connected to the computer. The power cable is then connected. To fit the toner cartridge, the front cover is opened and it is fitted after shaking it thoroughly to ensure that the toner is evenly distributed. The drivers that come with the printer are then fitted following the instructions that show on the desktop. To ensure that people do not get feedbacks like ‘printer not ready', they should ensure that they followed the instructions by making sure that all the connections are plugged in correctly and that the papers are fed properly. The printer drivers should also be installed properly. It is highly recommended you run a free registry scan for Windows and NEC SuperScript 870 errors before installing any driver updates.