Partner Port Devices Driver

Posted By admin On 13/10/21
  1. Partner Port Devices Driver License Test
  2. Partner Port Devices Driver Device
  3. Partner Port Devices Driver Updater
  4. Partner Port Devices Drivers

All other trademarks, logos and brand names shown on this website other than stated are the sole property of their respective companies and are not owned by Information on the may not be duplicated without permission. is not responsible for any damages or losses that may arise from incorrect driver installation. Features of the Active USB-COM Port Driver 1.Features: The USB device can be removed from the PC USB Port while the application opens the Serial Port with which the USB; device is connected. (It will be kept opening when the USB device is plugged into the USB Port again.) The Virtual Serial Port is always existed on PC even if USB device is.

Summary :


COM ports are common components of Device Manager. Windows users can see them easily by opening the Device Manager. However, problems may occur, causing the COM ports lost from Device Manager. If you are encountering this, please read the methods mentioned below to try to fix the problem yourself.

COM stands for Communication port and it is actually the original name of the serial port interface. The COM can be used to refer both physical ports and emulated ports, which are created via the Bluetooth or USB-to-serial adapters. Well, the COM ports missing in Device Manager problem happens now and then.

How to access Windows 10 Device Manager ports?

  1. Right click on This PC icon on the desktop.
  2. Choose Manage from the context menu.
  3. Select Device Manager under System Tools. (You can also press Start + X directly to select Device Manager.)
  4. Choose View from the menu bar.
  5. Choose Show hidden devices from the submenu.
  6. Locate Ports (COM & LPT) from the list in the right pane.
  7. Expand it to find Communications Port (COM).

MiniTool Software could help you recover data from hard disk, USB flash drive, and other external storage. If you find the USB ports not showing in Device Manager Windows 10, please read this to know how to fix USB not recognized issue.

Various solutions are provided for you to fix USB flash drive not recognized error and recover data from the inaccessible flash drive.

COM Ports Missing in Device Manager

However, there are many peoples said they can’t find ports in Device Manager and they desperately need a solution to it.

COM Ports Not Showing in Device Manager: Ture Cases

One: Com Port is Missing / Ports Option Not Available In Device Manager.

My com port is missing. And the ports option is not available in Device Manager. I'm able to perfectly connect and use my phone/modem with the computer. I had gone through several discussions about same topic here in to no avail. How do I enable it, or can you provide a link where I can download this com driver for windows 10? Thanks.- posted by etwdensegen sprechen in Microsoft Forum

Two: No Ports shown in Device Manager (even hidden) Win 7 Pro 64 bit.

I can't get an external modem to work (even though it shows in devices and printers window. I can't get a USB-serial port converter to work either. It would be helpful if I had info from the device manager window but nothing show up, even though I have turned on the show hidden devices. Any ideas? Thanks.- asked Paul Saacke in Microsoft Forum

Three: COM PORT is disappeared in Device Manager.

When I opened device manager at that time I found that, portable devices COM port option disappeared from device manager. What should I have to do to resolve this issue?- said SAY014 in HP Forum

So how to fix the problem and find back your Windows 10 COM ports? Please keep reading!

How Do I Add a COM Port to Device Manager

Some users complained that their Widows 10 COM ports disappeared from Device Manager after they have upgraded their Windows platforms. Whatever the cause, the users’ primary concern is how to restore missing COM ports. That’s what I’m going to talk in this section.

Method 1: Show hidden devices.

As I have mentioned at the beginning of this article, users can’t see the COM ports directly. Instead, they need to open Device Manager -> select View tab -> choose Show hidden devices. After that, they’ll see the Ports (COM & LPT) option and they only need to expand it to fins COM ports.

Method 2: add COM ports manually.

  1. Open Device Manager on your Windows 10 computer.
  2. Click on the Action option from menu bar.
  3. Choose Add legacy hardware from the submenu to open the Add Hardware window.
  4. Click on the Next button to move on.
  5. Check Install the hardware that I manually select from a list (Advanced) and press Next.
  6. Select Ports (COM & LPT) from the given list and press the Next button.
  7. Choose Standard port types option or the manufacturer for the ports; then, click Next.
  8. Click on the Finish button to complete.

Method 3: update the motherboard drivers.

If the motherboard drivers are too outdated, they will also lead to COM ports missing in Device Manager. Therefore, you are advised to update your motherboard drivers manually and see whether it works.


FTDI Driver Installation


Development boards such as the SparkFun RedBoard for Arduino and the Arduino Uno require special drivers or code that tells the computer how to interact with them. This guide is here to help you get this driver software installed as quickly as possible so you can get back to building circuits and learning about electronics!

These instructions apply to both the Arduino Uno, the Arduino Uno SMD, and the SparkFun RedBoard for Arduino.

Note: You should only have to complete this process one time. Once the correct drivers are installed, your board will be recognized by your computer every time you plug it in afterwards.
Note for Educators: You will most likely need to obtain administrative privileges from your network or IT administrator in order to install these drivers.

Scroll down to the corresponding section for whichever operating system (OS) you are using.

Partner Port Devices Driver License Test


Plug the board into your computer. Windows will likely complain about the device not having the correct driver. It may attempt to find it. If you have never plugged in a similar device to your computer, it probably won't find a driver to use. Luckily, when you downloaded the Arduino IDE, it also came with all the necessary drivers.

To install the correct driver, open the Device Manger. This can be found be searching for 'device manager' in the start menu. Once Device Manager is open, you should see a device with a tiny yellow triangle and exclamation mark next to it.

If you plugged in a SparkFun RedBoard, it will look like the image on the left. Plugging in an Arduino Uno will result in the image on the right.

Right-click on the unknown device, and select Properties.

In the properties window, select Driver Details.

Partner Port Devices Driver Device

Select the Browse my computer for driver software option.

Partner Port Devices Driver Updater

Navigate to the destination where you installed the Arduino IDE. On Windows, this will most likely be in your Program Files folder. Navigate to the drivers folder found inside the main Arduino folder. You can select the entire folder or the specific driver. needed Your path should look something like this but may vary:

Once the driver installation is complete, you should see the device reappear in the Device Manager window as a usable COM port. The number will vary depending on how many devices you have plugged into your computer. The RedBoard will appear as a USB Serial Port, as shown in the left image. The Uno will appear as an Arduino Uno, as shown in the right image.

Partner port devices driver updater

In the Arduino IDE, you should see that same serial port available under Tools -> Port.

If you are experiencing problems, please see our in-depth instructions.


Plug the board into your computer. Once plugged in, the operating system should recognize it as the appropriate device. In the Arduino IDE, click Tool -> Ports to ensure the device has been recognized. The SparkFun RedBoard will appear a cu.usbserial-XXXXXX device.

The Arduino Uno will appear as a cu.usbmodemXXXXXX device.

If you do not see an available serial port in the Arduino IDE after plugging in your board and waiting a moment, then you may need to install the drivers by hand. To do so, please see our in-depth instructions.


Plug the board into your computer. Once plugged in, the operating system should recognize it as the appropriate device. In the Arduino IDE, click Tool -> Ports to ensure the device has been recognized. The SparkFun RedBoard will appear a ttyUSBXX device.

The Arduino Uno will appear as a ttyACMXX device.

Partner Port Devices Drivers

If you do not see an available serial port in the Arduino IDE after plugging in your board and waiting a moment, then you may need to install the drivers by hand. To do so, please see our in-depth instructions.