Ptytrade Port Devices Driver

Posted By admin On 12/10/21
Hardware - Install a Printer as a Local Port Device
Applies to: Windows 10, 8.1, 8, 7, Vista and XP

Open the Device Manager by right clicking “My computer” and selecting control panel. Look under Ports (COM & LPT). You should see an open port named 'USB Serial Port' Right click on the 'USB Serial Port' and choose the 'Update Driver Software' option. Next, choose the 'Browse my computer for Driver software' option. Scroll down to the LPT/ COM port then double click Prolific USB to Serial Comm Port; Click Driver in the Windows Properties section; The driver must be numbered as '2.0.2.8' and dates accordingly If the driver was not installed, remove the Serial adapter then run 'PL2303DriverInstaller.exe' again.

Ptytrade

The offending xHCI device was gone. I then proceeded with a cycle of restarting and re-enabling them one by one (with restarts and logins into Windows each time to check Device Manager). Once they were all re-enabled, the problem was gone from Device Manager and the touch screen worked again. Thanks a bunch for the fix. Welcome to the HP® Official website to setup your printer. Get started with your new printer by downloading the software. You will be able to connect the printer to a network and print across devices.

Port
How do I install a printer as a Local Port device?
Solution:
Use the instructions below to install the printer using a Local Port on the given operating system.
NOTE: These instructions assume the following:
  • The printer is already shared from the computer that is hosting it. See How to Share a Printer- FAQ 38545 for more information.
  • That you have downloaded the proper drivers for the printer model you are installing.
  • That you are able to access the shared resources on that computer without being prompted for login credentials. If you cannot access the hosting PC without providing credentials, correct that issue before proceeding.
  • You have ensured the printer is shared and security is set to Everyone with Full Control.
If these steps have not been performed, please do so before attempting installation of a Local Port device. Failure to do so will result in failure errors when trying to create the port.
Click the + or the header to expand the section.

To install a printer locally on Windows 10, follow these steps:

Ptytrade
  1. Right-click on the Windows logo in the bottom left of the screen. Select Search.
  2. Search for Control Panel. Select it from the search results.
  3. Find Devices and Printers in the Control Panel and open it.
  4. Click Add a Printer (on the top).
  5. A window will come up that is searching for printers on the network. Click Stop, then click The printer I want isn't listed.

  6. Click Add a local printer or network printer with manual settings. Click Next.

  7. Click Create a new port. Select Local Port for Type of port.
  8. In the Port Name box, type the path to the printer in the following format, where server is the name of the print server and printer is the share name of the printer (e.g. serverprinter). Click OK.
  9. Select the printer model and driver. Click Next. If the exact model isn't listed, click Have Disk and browse to the location where you earlier extracted the drivers.
  10. Follow the rest of the wizard. When prompted to share the printer, select Do not share this printer.
    NOTE: Printers should only be shared from ONE computer, preferably the computer it is connected to via USB.

To install a printer locally on Windows 8.1, follow these steps:

Updater
  1. Right-click on the Windows logo in the bottom left of the screen. Select Control Panel.
  2. Find Devices and Printers in the Control Panel and open it.
  3. Click Add a Printer (on the top).
  4. A window will come up that is searching for printers on the network. Click Stop, then click The printer I want isn't listed.
  5. Click Add a local printer or network printer with manual settings. Click Next.
  6. Click Create a new port. Select Local Port for Type of port.
  7. In the Port Name box, type the path to the printer in the following format, where server is the name of the print server and printer is the share name of the printer (e.g. serverprinter). Click OK.
  8. Select the printer model and driver. Click Next. If the exact model isn't listed, click Have Disk and browse to the location where you earlier extracted the drivers.
  9. Follow the rest of the wizard. When prompted to share the printer, select Do not share this printer.
    NOTE: Printers should only be shared from ONE computer, preferably the computer it is connected to via USB.

To install a printer locally on Windows 8, follow these steps:

  1. Move your mouse to the lower-right to bring up the Charms bar, or press Windows key + C.
  2. Click on the Settings gear, then click Control Panel.
  3. In Control Panel, open Devices and Printers.
  4. Click Add a Printer (on the top).
  5. A window will come up that is searching for printers on the network. Click Stop, then click The printer I want isn't listed.
  6. Click Add a local printer or network printer with manual settings. Click Next.
  7. Click Create a new port. Select Local Port for Type of port.
  8. In the Port Name box, type the path to the printer in the following format, where server is the name of the print server and printer is the share name of the printer (e.g. serverprinter). Click OK.
  9. Select the printer model and driver. Click Next. If the exact model isn't listed, click Have Disk and browse to the location where you earlier extracted the drivers.
  10. Follow the rest of the wizard. When prompted to share the printer, select Do not share this printer.
    NOTE: Printers should only be shared from ONE computer, preferably the computer it is connected to via USB.

To install a printer locally on Windows Vista and 7, follow these steps:

  1. Click Start Devices and Printers.
  2. Click Add a Printer (on the top).
  3. Select Add a local printer.
  4. Select Create a new port. Select Local Port for the Port Type. Click Next.
  5. In the Port Name box, type the path to the printer in the following format, where server is the name of the print server and printer is the share name of the printer (e.g. serverprinter). Click OK
  6. Select the printer model and driver. Click Next. If the exact model isn't listed, click Have Disk and browse to the location where you earlier extracted the drivers.
  7. Follow the rest of the wizard. When prompted to share the printer, select Do not share this printer.
    NOTE: Printers should only be shared from ONE computer, preferably the computer it is connected to via USB.

To install a printer locally on a Windows XP-based computer, follow these steps:

  1. Go to Start Control Panel Printers and Other Hardware Printers and Faxes.
  2. Double-click Add Printer to start the Add Printer Wizard. Click Next.
  3. Click Local printer. Clear the Automatically detect and install check box. Click Next.
  4. Click Create a new port. Click Local Port in the Port type section.
  5. In the Port Name box, type the path to the printer in the following format, where server is the name of the print server and printer is the share name of the printer: serverprinter.
  6. Click Next. Select the driver for your printer. If the driver is not listed, click Have Disk and browse to the location where you earlier extracted the drivers.
  7. Click Next, and then follow the instructions to finish the wizard. When prompted to share the printer, select Do not share this printer.
    NOTE: Printers should only be shared from ONE computer, preferably the computer it is connected to via USB.

Ptytrade Port Devices Driver

Devices

Ptytrade Port Devices Driver Device

Printed copies of this document are considered uncontrolled.
21672.Rev006 01.06.2021

Ptytrade Port Devices Driver Updater

DescriptionTypeOSVersionDate
Administrative Tools for Intel® Network Adapters

This download record installs version 26.0 of the administrative tools for Intel® Network Adapters.

SoftwareOS Independent
Linux*
26.0
Latest
2/1/2021
Intel® Network Adapter Driver for 82575/6, 82580, I350, and I210/211-Based Gigabit Network Connections for Linux*

Intel® Network Adapter Driver for 82575/6, 82580, I350, and I210/211-based Gigabit Network Connections for Linux*

DriverLinux*5.5.2
Latest
2/1/2021
Intel® Network Adapter Driver for PCIe* Intel® 10 Gigabit Ethernet Network Connections under Linux*

Includes Linux*-based drivers version 5.10.2 for Intel® 10 Gigabit Ethernet Network Connections with PCI Express*.

DriverLinux*5.10.2
Latest
2/1/2021
Intel® Network Adapters Driver for PCIe* 10 Gigabit Network Connections Under FreeBSD*

This release includes the 10 gigabit FreeBSD* Base Driver for Intel® Network Connections.

DriverFreeBSD*3.3.22
Latest
2/1/2021
Intel® Ethernet Adapter Complete Driver Pack

This download installs version 26.0 of the Intel® Ethernet Adapter Complete Driver Pack for supported OS versions.

DriverOS Independent26.0
Latest
2/1/2021
Intel® Network Adapter Virtual Function Driver for Intel® 10 Gigabit Ethernet Network Connections

Provides the ixgbevf driver version 4.10.2 for Intel® 10 Gigabit Ethernet Network Connection virtual function devices.

DriverLinux*4.10.2
Latest
2/1/2021
Intel® Ethernet Connections Boot Utility, Preboot Images, and EFI Drivers

This download version 26.0 installs UEFI drivers, Intel® Boot Agent, and Intel® iSCSI Remote Boot images to program the PCI option ROM flash image and update flash configuration options.

SoftwareOS Independent
Linux*
26.0
Latest
2/1/2021
Intel® Network Adapter Driver for Windows Server 2012*

This download record installs version 26.0 of the Intel® Network Adapters driver for Windows Server 2012*.

DriverWindows Server 2012*26.0
Latest
2/1/2021
Intel® Network Adapter Driver for Windows 8.1*

Installs Intel® Network Adapter drivers release 26.0 for Windows 8.1*.

DriverWindows 8.1*
Windows 8.1, 32-bit*
Windows 8.1, 64-bit*
26.0
Latest
2/1/2021
Intel® Network Adapter Driver for Windows Server 2012 R2*

This download installs version 26.0 of the Intel® Network Adapters for Windows Server 2012 R2*.

DriverWindows Server 2012 R2*26.0
Latest
2/1/2021
Intel® Network Adapter Linux* Virtual Function Driver for Intel® Ethernet Controller 700 and E810 Series

This release includes iavf Linux* Virtual Function Drivers for Intel® Ethernet Network devices based on 700 and E810 Series controllers.

DriverLinux*4.0.2
Latest
2/1/2021
Non-Volatile Memory (NVM) Update Utility for Intel® Ethernet Network Adapter 700 Series

Provides the Non-Volatile Memory (NVM) Update Utility for Intel® Ethernet Network Adapter 700 Series.

FirmwareOS Independent8.20
Latest
2/1/2021
Intel® Network Adapter Driver for Windows® 10

Installs the Intel® Network Adapter drivers release 26.0 for Windows® 10.

DriverWindows 10*
Windows 10, 32-bit*
Windows 10, 64-bit*
26.0
Latest
2/1/2021
Intel® Network Adapter Driver for Intel® Ethernet Controller 700 Series under FreeBSD*

This release includes FreeBSD Base Drivers for Intel® Ethernet Network Connections. Supporting devices based on the 700 series controllers.

DriverFreeBSD*1.12.13
Latest
2/1/2021
Non-Volatile Memory (NVM) Update Utility for Intel® Ethernet Adapters 700 Series—Windows*

Provides the Non-Volatile Memory (NVM) Update Utility for Intel® Ethernet Adapters 700 Series—Windows*.

FirmwareOS Independent8.20
Latest
2/1/2021
Non-Volatile Memory (NVM) Update Utility for Intel® Ethernet Adapters 700 Series—Linux*

Provides the Non-Volatile Memory (NVM) Update Utility for Intel® Ethernet Adapters 700 Series—Linux*.

FirmwareLinux*8.20
Latest
2/1/2021
Non-Volatile Memory (NVM) Update Utility for Intel® Ethernet Adapters 700 Series—FreeBSD*

Provides the Non-Volatile Memory (NVM) Update Utility for Intel® Ethernet Adapters 700 Series—FreeBSD*.

FirmwareFreeBSD*8.20
Latest
2/1/2021
Non-Volatile Memory (NVM) Update Utility for Intel® Ethernet Adapters 700 Series—VMware ESX*

Provides the Non-Volatile Memory (NVM) Update Utility for Intel® Ethernet Adapters 700 Series—VMware ESX*.

FirmwareVMware*8.20
Latest
2/1/2021
Non-Volatile Memory (NVM) Update Utility for Intel® Ethernet Adapters 700 Series—EFI

Provides the Non-Volatile Memory (NVM) Update Utility for Intel® Ethernet Adapters 700 Series—EFI.

FirmwareOS Independent8.20
Latest
2/1/2021
Intel® Network Adapter Virtual Function Driver for PCIe* 10 Gigabit Network Connections Under FreeBSD*

Release 1.5.25 includes the 10 gigabit FreeBSD* Virtual Function Driver for Intel® Network Connection.

DriverFreeBSD*1.5.25
Latest
2/1/2021