Qlogic Driver Download For Windows 10

Posted By admin On 13/10/21
  1. Qlogic Driver Download For Windows 10 64-bit
  2. Qlogic Driver
  3. Qlogic Driver Download For Windows 10 Windows 10
  4. Qlogic Driver Download For Windows 10 32-bit
  5. Qlogic Driver Download
  6. Qlogic Driver Download For Windows 10 Free
Printable version

Download drivers for Broadcom QLogic BCM57810 10 Gigabit Ethernet Virtual Function network cards (Windows 7 x64), or install DriverPack Solution software for automatic driver download and update. Here is a step by step manual guide for QLogic BCM57800 Diag Driver software installation process on Windows 7 / 8 / 8.1 / 10 / Vista / XP. 1 Download B57BCMCDT7.12b.4.1.zip file for Windows 7 / 8 / 8.1 / 10 / Vista / XP, save and unpack it if needed. Management Tools: Name: Version: Description: Support Files: SANsurfer FC HBA Manager (x86/x64/IA64) 5.0.1 build 57: SANsurfer FC HBA Manager for Windows Vista and XP platforms.

HPE QLogic FastLinQ 10/25/50 GbE Drivers for Microsoft Windows Server x64 Editions

By downloading, you agree to the terms and conditions of the Hewlett Packard Enterprise Software License Agreement.
Note: Some software requires a valid warranty, current Hewlett Packard Enterprise support contract, or a license fee.

Type:Driver - Network
Version:8.50.10.0(17 Jul 2020)
Operating System(s):
Microsoft Windows Server 2016
Microsoft Windows Server 2019
Microsoft Windows Server 2012 R2
Multi-part download
File name:cp043122.compsig (2.0 KB)
File name:cp043122.exe (3.1 MB)
This Component Package contains the drivers for the HPE QLogic FastLinQ 10/25/50 GbE Server Adapters for Microsoft Windows Server 2012 R2, Microsoft Windows Server 2016 and Microsoft Windows Server 2019.

To ensure the integrity of your download, HPE recommends verifying your results with the following SHA-256 Checksum values:

e4b43eb0afbf8e79e3a0d5e81553281b8f7a64504cb496a1e8949a511e113c66cp043122.compsig
49c8dc48fbf430ba88e11d19d297a8cebc78737438ada639f59bc5e98def606ecp043122.exe

Reboot Requirement:
Reboot is not required after installation for updates to take effect and hardware stability to be maintained.

Installation:
Download the Smart Component to a directory on your hard drive and change to that directory.

From that drive and directory, execute the downloaded file.

Click the Install button to proceed with the installation.

End User License Agreements:
HPE Software License Agreement v1
Hewlett-Packard End User License Agreement

Upgrade Requirement:
Optional - Users should update to this version if their system is affected by one of the documented fixes or if there is a desire to utilize any of the enhanced functionality provided by this version.

Important:

HPE recommends the firmware provided in HPE QLogic FastLinQ Online Firmware Upgrade Utility for Windows Server x64 Editions, version 5.2.3.0 or later, for use with these drivers.

Notes:

This component contains the following drivers:

  • Windows qevbd Driver, 8.50.10.0
  • Windows qend Driver, 8.50.8.0
  • Windows qefcoe Driver, 8.50.1.0b
  • Windows qeois Driver, 8.50.1.0a

Supported Devices and Features:

This product supports the following network adapters:

  • HPE Ethernet 10Gb 2-port 521T Adapter
  • HPE Ethernet 10Gb 2-port 524SFP+ Adapter
  • HPE Ethernet 10/25Gb 2-port 621SFP28 Adapter
  • HPE Ethernet 10/25Gb 2-port 622FLR-SFP28 Converged Network Adapter
  • HPE StoreFabric CN1300R Converged Network Adapter
  • HPE StoreFabric CN1200R-T Converged Network Adapter

Upgrade Requirement:
Optional - Users should update to this version if their system is affected by one of the documented fixes or if there is a desire to utilize any of the enhanced functionality provided by this version.

  • This product correct an issue which fixes the Virtual Function (VF) sleep duration on the channel while it waits for Physical Function(PF) response.
  • This product correct an issue which System crashed when Single Root I/O Virtualization(SR-IOV) enabled on few partitions and disabled on few partitions using OneView.
  • This product correct an issue which operating system boot failure after update Firmware to 08.50.27.
  • This product correct an issue which System crashed is seen while upgrading drivers on enabled Network Partitioning (NPAR) and Single Root I/O Virtualization(SR-IOV) with enterprise data Center mode.
  • This product correct an issue which Virtual Machines (VMs) crash randomly upon advanced property disable/enable with Max virtual functions (VFs) enumerated on all Physical Functions(PFs).
  • This product correct an issue which System crashed seen while disabling Network Driver Interface Specification (NDIS) driver while running RoCEv2 IPv6 traffic on Management OS.

HPE recommends the firmware provided in HPE QLogic FastLinQ Online Firmware Upgrade Utility for Windows Server x64 Editions, version 5.2.3.0 or later, for use with these drivers.

Version:8.50.10.0 (17 Jul 2020)

Upgrade Requirement:
Optional - Users should update to this version if their system is affected by one of the documented fixes or if there is a desire to utilize any of the enhanced functionality provided by this version.

  • This product correct an issue which fixes the Virtual Function (VF) sleep duration on the channel while it waits for Physical Function(PF) response.
  • This product correct an issue which System crashed when Single Root I/O Virtualization(SR-IOV) enabled on few partitions and disabled on few partitions using OneView.
  • This product correct an issue which operating system boot failure after update Firmware to 08.50.27.
  • This product correct an issue which System crashed is seen while upgrading drivers on enabled Network Partitioning (NPAR) and Single Root I/O Virtualization(SR-IOV) with enterprise data Center mode.
  • This product correct an issue which Virtual Machines (VMs) crash randomly upon advanced property disable/enable with Max virtual functions (VFs) enumerated on all Physical Functions(PFs).
  • This product correct an issue which System crashed seen while disabling Network Driver Interface Specification (NDIS) driver while running RoCEv2 IPv6 traffic on Management OS.

Version:8.42.10.0 (20 Dec 2019)

Upgrade Requirement:
Optional - Users should update to this version if their system is affected by one of the documented fixes or if there is a desire to utilize any of the enhanced functionality provided by this version.

This product correct an issue which vlan indication did not arrive when the driver is in UFP mode.
This product correct an issue that Windows system crash when VF driver on BB.
This product correct an issue which BSOD in windows 2019 VM when installing NDIS driver.
This product correct an issue which BSOD on Windows 2019 bugcheck 0x139 on QENDA.sys driver.

This product no longer supports Synergy servers and devices. Synergy servers and devices are now supported by the HPE Synergy QLogic FastLinQ 10/25/50 GbE Drivers for Windows Server x64 Editions.


Version:8.38.4.0 (12 Aug 2019)

Upgrade Requirement:
Optional - Users should update to this version if their system is affected by one of the documented fixes or if there is a desire to utilize any of the enhanced functionality provided by this version.

This product corrects an issue which results in a Windows Stop Error (BSOD) during shutdown with FCoE enabled.

This product corrects an issue where a crash dump is not generated after a BSOD.

This product corrects an discontinuity between link speed options in the UEFI HII menu and driver parameters.

This product corrects an issue which results in a BSOD when a system is configured with a virtual switch with Switch Embedded Teaming enabled.

This product corrects an issue which causes an incorrect value for NumVFs to be reported before creating a vSwitch for the device.

This product corrects an issue where Wake on Lan cannot be enabled in Windows Server 2016 or Windows Server 2019.

This product corrects an issue where the Get-NetAdapterQos command intermittently doesn't list the operational DCDX configuration.

This product corrects an issue which resulted in unsupported link parameters listing in advanced properties.

This product now supports the HPE Synergy 6820C 25/50Gb Converged Network Adapter.


Version:8.37.37.0(B) (3 Jun 2019)

Upgrade Requirement:
Optional - Users should update to this version if their system is affected by one of the documented fixes or if there is a desire to utilize any of the enhanced functionality provided by this version.

This driver addresses a system crash seen while using Hyper-V and MAC spoofing.

This product now supports the HPE Ethernet 10Gb 2-port 524SFP+ Adapter.


Version:8.37.37.0 (2 Apr 2019)

Upgrade Requirement:
Optional - Users should update to this version if their system is affected by one of the documented fixes or if there is a desire to utilize any of the enhanced functionality provided by this version.

This driver corrects an issue which results in a pause flood when bringing up all ports.
This driver corrects an issue which results in a connection drop while using the iWARP protocol.
This driver addresses a system crash in Windows Server 2019 which occurs during chipset driver installation.
This driver corrects an issue where no FCoE npiv devices are enumerated.
This driver corrects an issue which prevents storage devices from enumerating on systems with more than 256 cores.
This driver corrects an issue which results in an incorrect processor being selected for queue affinity with RSSv2.
This driver corrects an issue which the FCoE initiator does not login to the switch after the system comes up from hibernation.
This driver corrects an issue where the value of 'IovQueuePairsInUse' is greater than 'IovQueuePairCount' in Get-vmswitch cmdlet output.


Version:8.37.20.0 (27 Nov 2018)

Upgrade Requirement:
Optional - Users should update to this version if their system is affected by one of the documented fixes or if there is a desire to utilize any of the enhanced functionality provided by this version.

This product now supports Windows Server 2019.


Version:8.34.3.0 (27 Sep 2018)

Upgrade Requirement:
Optional - Users should update to this version if their system is affected by one of the documented fixes or if there is a desire to utilize any of the enhanced functionality provided by this version.

This product now supports the following network adapters:

  • HPE StoreFabric CN1200R-T Converged Network Adapter
  • HPE StoreFabric CN1300R Converged Network Adapter
  • HPE Synergy 4820C 10/25Gb Converged Network Adapter

Version:8.33.23.0 (26 Jun 2018)

Upgrade Requirement:
Optional - Users should update to this version if their system is affected by one of the documented fixes or if there is a desire to utilize any of the enhanced functionality provided by this version.

  • This driver addresses an issue where iWARP does not appear under Device Manager advanced properties when in RDMA mode.
  • This driver addresses an issue where the link speed is always shown to be 10Gbps.
  • This driver addresses a system crash seen when changing NIC advanced parameters after running iWARP traffic.
  • This driver addresses a system crash seen while loading or unloading the VBD driver with RoCE traffic.
  • This driver addresses a system crash seen when the Virtual Switch RSS parameter is disabled.
  • This driver addresses a system crash seen upon reboot while running traffic on virtual machine queues with a guest driver configured.
  • This driver addresses a system crash seen when disabling IPv6 binding from adapter ports.
  • This driver addresses a system crash seen when disabling a miniport with Driver Verifier.
  • This driver corrects an issue where RSS processor selection across different NUMA nodes does not happen when the processor groups are different.
  • This driver corrects an issue where unexpected L2 traffic is received.
  • This driver corrects a mismatch in the maximum range for the iWARP Receive Window Size.
  • This driver corrects an issue where host DCB settings don't take effect with an adapter in Non-Willing mode.

The maximum number of RDMA Queue Pairs (QPs) has been increased to 4096.


Version:8.31.1.0 (5 Feb 2018)

Upgrade Requirement:
Optional - Users should update to this version if their system is affected by one of the documented fixes or if there is a desire to utilize any of the enhanced functionality provided by this version.

  • This driver corrects an issue which results in performance degradation when using iWARP with specific block sizes.
  • This driver corrects an issue which results in lower throughput of RDMA reads compared to writes.
  • This driver corrects an issue which results in stuck iWARP connections in a heavily stressed environment.
  • This driver corrects an issue where an RDMA user application hangs when using Legacy DPM.
  • This driver corrects an issue where a virtual function fails to provide connectivity.
  • This driver corrects an issue which results in a virtual machine Windows Stop Error (BSOD) when using Virtual Machine Queue (VMQ) processing.
  • This driver corrects an issue where an RDMA NIC is not displayed by the 'perfmon' tool.
  • This driver corrects an issue which results in a BSOD when 'iWARP Recv Window Size' is changed to 1024.
  • This driver corrects an issue which results in a BSOD during a driver update if the device has a Single Root I/O Virtualization (SR-IOV) switch created.
  • This driver corrects an issue which results in a BSOD during a driver update if the device is running RDMA and L2 traffic.
  • This driver corrects an issue which results in a virtual machine crash during driver installation when the host OS is VMware ESXi 6.5.
  • This driver corrects an issue which results in dropped iWARP RDMA connections.
  • This driver corrects the number of queue pairs in the case of RDMA configuration mismatch between user settings and adapter capability.

This driver now allows storage clients to use Smart Storage Area Networks (SAN).


Version:8.22.6.0 (25 Sep 2017)

Upgrade Requirement:
Optional - Users should update to this version if their system is affected by one of the documented fixes or if there is a desire to utilize any of the enhanced functionality provided by this version.

  • This product addresses an issue which results in the Device Manager hanging while iwarp traffic is running.
  • This product addresses an issue which results in a Windows Stop Error (BSOD) when enabling RDMA.
  • This product addresses an issue which results in a BSOD while stopping iWARP traffic.
  • This product addresses an issue which results in a BSOD after enabling NPAR mode.
  • This product addresses an issue which results in a BSOD while disabling and enabling the VBD driver.
  • This product addresses an issue where SR-IOV capability is not available in the VMSwitch.
  • This product addresses an issue where the Wake-On-LAN parameter is not displayed in advanced properties for supported adapters.
  • The driver INF is now updated to display the correct number of maximum virtual functions.
  • This product no longer displays VMMQ Max QP in advanced properties.

Version:8.18.30.0 (12 Jul 2017)

Upgrade Requirement:
Optional - Users should update to this version if their system is affected by one of the documented fixes or if there is a desire to utilize any of the enhanced functionality provided by this version.

This product addresses an issue where max CQ limit was reached due to incorrected requested resources.
This product addresses an issue where system could crash on server reboot if traffic was running.
This product addresses an issue where pre-boot link speed did not match default speed in OS.
This product addresses an issue where RoCE or iWARP events were not properly processed.
This product will now fail back to basic L2 interface when RDMA interface doesn’t match with what is supported by VBD driver.
This product addresses an issue where speed and duplex settings did not show autonegotiation as an option for some adapters.
This product addresses an issue which could result in failed connections using RoCE V2.
This product addresses an issue where the maximum number of VMMQ per port did not show 16.
This product addresses an issue which could result in a BSOD while deleting an SR-IOV vSwitch.
This product addresses an issue which could result in a BSOD after reboot with VMMQ in use.
This product addresses an issue where only 2 VMQ are displayed in vswitch output.
This product addresses an issue where driver advanced properties did not show the correct speed settings.

This product now supports the following network adapters:

  • HPE Ethernet 10Gb 2-port 521T Adapter
  • HPE Ethernet 10/25Gb 2-port 621SFP28 Adapter
  • HPE Ethernet 10/25Gb 2-port 622FLR-SFP28 Converged Network Adapter
  • HPE Synergy 6810C 25/50Gb Ethernet Adapter

Version:8.11.9.0 (24 Oct 2016)

Upgrade Requirement:
Optional - Users should update to this version if their system is affected by one of the documented fixes or if there is a desire to utilize any of the enhanced functionality provided by this version.

This product now supports Windows Server 2016.


Version:8.7.32.0 (26 Sep 2016)

Upgrade Requirement:
Optional - Users should update to this version if their system is affected by one of the documented fixes or if there is a desire to utilize any of the enhanced functionality provided by this version.

Initial release.


Type:Driver - Network
Version:8.50.10.0(17 Jul 2020)
Operating System(s):
Microsoft Windows Server 2012 R2
Microsoft Windows Server 2016
Microsoft Windows Server 2019

Description

This Component Package contains the drivers for the HPE QLogic FastLinQ 10/25/50 GbE Server Adapters for Microsoft Windows Server 2012 R2, Microsoft Windows Server 2016 and Microsoft Windows Server 2019.

Installation Instructions

To ensure the integrity of your download, HPE recommends verifying your results with the following SHA-256 Checksum values:

e4b43eb0afbf8e79e3a0d5e81553281b8f7a64504cb496a1e8949a511e113c66cp043122.compsig
49c8dc48fbf430ba88e11d19d297a8cebc78737438ada639f59bc5e98def606ecp043122.exe

Reboot Requirement:
Reboot is not required after installation for updates to take effect and hardware stability to be maintained.

Installation:
Download the Smart Component to a directory on your hard drive and change to that directory.

From that drive and directory, execute the downloaded file.

Click the Install button to proceed with the installation.

Release Notes

End User License Agreements:
HPE Software License Agreement v1
Hewlett-Packard End User License Agreement

Upgrade Requirement:
Optional - Users should update to this version if their system is affected by one of the documented fixes or if there is a desire to utilize any of the enhanced functionality provided by this version.

Important:

HPE recommends the firmware provided in HPE QLogic FastLinQ Online Firmware Upgrade Utility for Windows Server x64 Editions, version 5.2.3.0 or later, for use with these drivers.

Notes:

This component contains the following drivers:

  • Windows qevbd Driver, 8.50.10.0
  • Windows qend Driver, 8.50.8.0
  • Windows qefcoe Driver, 8.50.1.0b
  • Windows qeois Driver, 8.50.1.0a

Supported Devices and Features:

This product supports the following network adapters:

  • HPE Ethernet 10Gb 2-port 521T Adapter
  • HPE Ethernet 10Gb 2-port 524SFP+ Adapter
  • HPE Ethernet 10/25Gb 2-port 621SFP28 Adapter
  • HPE Ethernet 10/25Gb 2-port 622FLR-SFP28 Converged Network Adapter
  • HPE StoreFabric CN1300R Converged Network Adapter
  • HPE StoreFabric CN1200R-T Converged Network Adapter

Fixes

Upgrade Requirement:
Optional - Users should update to this version if their system is affected by one of the documented fixes or if there is a desire to utilize any of the enhanced functionality provided by this version.

  • This product correct an issue which fixes the Virtual Function (VF) sleep duration on the channel while it waits for Physical Function(PF) response.
  • This product correct an issue which System crashed when Single Root I/O Virtualization(SR-IOV) enabled on few partitions and disabled on few partitions using OneView.
  • This product correct an issue which operating system boot failure after update Firmware to 08.50.27.
  • This product correct an issue which System crashed is seen while upgrading drivers on enabled Network Partitioning (NPAR) and Single Root I/O Virtualization(SR-IOV) with enterprise data Center mode.
  • This product correct an issue which Virtual Machines (VMs) crash randomly upon advanced property disable/enable with Max virtual functions (VFs) enumerated on all Physical Functions(PFs).
  • This product correct an issue which System crashed seen while disabling Network Driver Interface Specification (NDIS) driver while running RoCEv2 IPv6 traffic on Management OS.

Important

HPE recommends the firmware provided in HPE QLogic FastLinQ Online Firmware Upgrade Utility for Windows Server x64 Editions, version 5.2.3.0 or later, for use with these drivers.

Revision History

Version:8.50.10.0 (17 Jul 2020)

Upgrade Requirement:
Optional - Users should update to this version if their system is affected by one of the documented fixes or if there is a desire to utilize any of the enhanced functionality provided by this version.

  • This product correct an issue which fixes the Virtual Function (VF) sleep duration on the channel while it waits for Physical Function(PF) response.
  • This product correct an issue which System crashed when Single Root I/O Virtualization(SR-IOV) enabled on few partitions and disabled on few partitions using OneView.
  • This product correct an issue which operating system boot failure after update Firmware to 08.50.27.
  • This product correct an issue which System crashed is seen while upgrading drivers on enabled Network Partitioning (NPAR) and Single Root I/O Virtualization(SR-IOV) with enterprise data Center mode.
  • This product correct an issue which Virtual Machines (VMs) crash randomly upon advanced property disable/enable with Max virtual functions (VFs) enumerated on all Physical Functions(PFs).
  • This product correct an issue which System crashed seen while disabling Network Driver Interface Specification (NDIS) driver while running RoCEv2 IPv6 traffic on Management OS.

Version:8.42.10.0 (20 Dec 2019)

Upgrade Requirement:
Optional - Users should update to this version if their system is affected by one of the documented fixes or if there is a desire to utilize any of the enhanced functionality provided by this version.

This product correct an issue which vlan indication did not arrive when the driver is in UFP mode.
This product correct an issue that Windows system crash when VF driver on BB.
This product correct an issue which BSOD in windows 2019 VM when installing NDIS driver.
This product correct an issue which BSOD on Windows 2019 bugcheck 0x139 on QENDA.sys driver.

This product no longer supports Synergy servers and devices. Synergy servers and devices are now supported by the HPE Synergy QLogic FastLinQ 10/25/50 GbE Drivers for Windows Server x64 Editions.


Version:8.38.4.0 (12 Aug 2019)

Upgrade Requirement:
Optional - Users should update to this version if their system is affected by one of the documented fixes or if there is a desire to utilize any of the enhanced functionality provided by this version.

This product corrects an issue which results in a Windows Stop Error (BSOD) during shutdown with FCoE enabled.

This product corrects an issue where a crash dump is not generated after a BSOD.

This product corrects an discontinuity between link speed options in the UEFI HII menu and driver parameters.

This product corrects an issue which results in a BSOD when a system is configured with a virtual switch with Switch Embedded Teaming enabled.

This product corrects an issue which causes an incorrect value for NumVFs to be reported before creating a vSwitch for the device.

This product corrects an issue where Wake on Lan cannot be enabled in Windows Server 2016 or Windows Server 2019.

This product corrects an issue where the Get-NetAdapterQos command intermittently doesn't list the operational DCDX configuration.

This product corrects an issue which resulted in unsupported link parameters listing in advanced properties.

This product now supports the HPE Synergy 6820C 25/50Gb Converged Network Adapter.


Version:8.37.37.0(B) (3 Jun 2019)

Upgrade Requirement:
Optional - Users should update to this version if their system is affected by one of the documented fixes or if there is a desire to utilize any of the enhanced functionality provided by this version.

This driver addresses a system crash seen while using Hyper-V and MAC spoofing.

This product now supports the HPE Ethernet 10Gb 2-port 524SFP+ Adapter.


Version:8.37.37.0 (2 Apr 2019)

Upgrade Requirement:
Optional - Users should update to this version if their system is affected by one of the documented fixes or if there is a desire to utilize any of the enhanced functionality provided by this version.

This driver corrects an issue which results in a pause flood when bringing up all ports.
This driver corrects an issue which results in a connection drop while using the iWARP protocol.
This driver addresses a system crash in Windows Server 2019 which occurs during chipset driver installation.
This driver corrects an issue where no FCoE npiv devices are enumerated.
This driver corrects an issue which prevents storage devices from enumerating on systems with more than 256 cores.
This driver corrects an issue which results in an incorrect processor being selected for queue affinity with RSSv2.
This driver corrects an issue which the FCoE initiator does not login to the switch after the system comes up from hibernation.
This driver corrects an issue where the value of 'IovQueuePairsInUse' is greater than 'IovQueuePairCount' in Get-vmswitch cmdlet output.


Version:8.37.20.0 (27 Nov 2018)

Upgrade Requirement:
Optional - Users should update to this version if their system is affected by one of the documented fixes or if there is a desire to utilize any of the enhanced functionality provided by this version.

This product now supports Windows Server 2019.


Version:8.34.3.0 (27 Sep 2018)

Upgrade Requirement:
Optional - Users should update to this version if their system is affected by one of the documented fixes or if there is a desire to utilize any of the enhanced functionality provided by this version.

This product now supports the following network adapters:

  • HPE StoreFabric CN1200R-T Converged Network Adapter
  • HPE StoreFabric CN1300R Converged Network Adapter
  • HPE Synergy 4820C 10/25Gb Converged Network Adapter

Version:8.33.23.0 (26 Jun 2018)

Upgrade Requirement:
Optional - Users should update to this version if their system is affected by one of the documented fixes or if there is a desire to utilize any of the enhanced functionality provided by this version.

  • This driver addresses an issue where iWARP does not appear under Device Manager advanced properties when in RDMA mode.
  • This driver addresses an issue where the link speed is always shown to be 10Gbps.
  • This driver addresses a system crash seen when changing NIC advanced parameters after running iWARP traffic.
  • This driver addresses a system crash seen while loading or unloading the VBD driver with RoCE traffic.
  • This driver addresses a system crash seen when the Virtual Switch RSS parameter is disabled.
  • This driver addresses a system crash seen upon reboot while running traffic on virtual machine queues with a guest driver configured.
  • This driver addresses a system crash seen when disabling IPv6 binding from adapter ports.
  • This driver addresses a system crash seen when disabling a miniport with Driver Verifier.
  • This driver corrects an issue where RSS processor selection across different NUMA nodes does not happen when the processor groups are different.
  • This driver corrects an issue where unexpected L2 traffic is received.
  • This driver corrects a mismatch in the maximum range for the iWARP Receive Window Size.
  • This driver corrects an issue where host DCB settings don't take effect with an adapter in Non-Willing mode.

The maximum number of RDMA Queue Pairs (QPs) has been increased to 4096.


Version:8.31.1.0 (5 Feb 2018)

Upgrade Requirement:
Optional - Users should update to this version if their system is affected by one of the documented fixes or if there is a desire to utilize any of the enhanced functionality provided by this version.

  • This driver corrects an issue which results in performance degradation when using iWARP with specific block sizes.
  • This driver corrects an issue which results in lower throughput of RDMA reads compared to writes.
  • This driver corrects an issue which results in stuck iWARP connections in a heavily stressed environment.
  • This driver corrects an issue where an RDMA user application hangs when using Legacy DPM.
  • This driver corrects an issue where a virtual function fails to provide connectivity.
  • This driver corrects an issue which results in a virtual machine Windows Stop Error (BSOD) when using Virtual Machine Queue (VMQ) processing.
  • This driver corrects an issue where an RDMA NIC is not displayed by the 'perfmon' tool.
  • This driver corrects an issue which results in a BSOD when 'iWARP Recv Window Size' is changed to 1024.
  • This driver corrects an issue which results in a BSOD during a driver update if the device has a Single Root I/O Virtualization (SR-IOV) switch created.
  • This driver corrects an issue which results in a BSOD during a driver update if the device is running RDMA and L2 traffic.
  • This driver corrects an issue which results in a virtual machine crash during driver installation when the host OS is VMware ESXi 6.5.
  • This driver corrects an issue which results in dropped iWARP RDMA connections.
  • This driver corrects the number of queue pairs in the case of RDMA configuration mismatch between user settings and adapter capability.

This driver now allows storage clients to use Smart Storage Area Networks (SAN).


Version:8.22.6.0 (25 Sep 2017)

Upgrade Requirement:
Optional - Users should update to this version if their system is affected by one of the documented fixes or if there is a desire to utilize any of the enhanced functionality provided by this version.

  • This product addresses an issue which results in the Device Manager hanging while iwarp traffic is running.
  • This product addresses an issue which results in a Windows Stop Error (BSOD) when enabling RDMA.
  • This product addresses an issue which results in a BSOD while stopping iWARP traffic.
  • This product addresses an issue which results in a BSOD after enabling NPAR mode.
  • This product addresses an issue which results in a BSOD while disabling and enabling the VBD driver.
  • This product addresses an issue where SR-IOV capability is not available in the VMSwitch.
  • This product addresses an issue where the Wake-On-LAN parameter is not displayed in advanced properties for supported adapters.
  • The driver INF is now updated to display the correct number of maximum virtual functions.
  • This product no longer displays VMMQ Max QP in advanced properties.

Version:8.18.30.0 (12 Jul 2017)

Upgrade Requirement:
Optional - Users should update to this version if their system is affected by one of the documented fixes or if there is a desire to utilize any of the enhanced functionality provided by this version.

This product addresses an issue where max CQ limit was reached due to incorrected requested resources.
This product addresses an issue where system could crash on server reboot if traffic was running.
This product addresses an issue where pre-boot link speed did not match default speed in OS.
This product addresses an issue where RoCE or iWARP events were not properly processed.
This product will now fail back to basic L2 interface when RDMA interface doesn’t match with what is supported by VBD driver.
This product addresses an issue where speed and duplex settings did not show autonegotiation as an option for some adapters.
This product addresses an issue which could result in failed connections using RoCE V2.
This product addresses an issue where the maximum number of VMMQ per port did not show 16.
This product addresses an issue which could result in a BSOD while deleting an SR-IOV vSwitch.
This product addresses an issue which could result in a BSOD after reboot with VMMQ in use.
This product addresses an issue where only 2 VMQ are displayed in vswitch output.
This product addresses an issue where driver advanced properties did not show the correct speed settings.

This product now supports the following network adapters:

  • HPE Ethernet 10Gb 2-port 521T Adapter
  • HPE Ethernet 10/25Gb 2-port 621SFP28 Adapter
  • HPE Ethernet 10/25Gb 2-port 622FLR-SFP28 Converged Network Adapter
  • HPE Synergy 6810C 25/50Gb Ethernet Adapter

Version:8.11.9.0 (24 Oct 2016)

Upgrade Requirement:
Optional - Users should update to this version if their system is affected by one of the documented fixes or if there is a desire to utilize any of the enhanced functionality provided by this version.

This product now supports Windows Server 2016.


Version:8.7.32.0 (26 Sep 2016)

Upgrade Requirement:
Optional - Users should update to this version if their system is affected by one of the documented fixes or if there is a desire to utilize any of the enhanced functionality provided by this version.

Initial release.


Legal Disclaimer: Products sold prior to the November 1, 2015 separation of Hewlett-Packard Company into Hewlett Packard Enterprise Company and HP Inc. may have older product names and model numbers that differ from current models.

QME2572 Dual Port
Host Bus Adapters
QME2572 Fibre Channel Controller
Dell Emulex Qlogic Fibre

QLOGIC QME2572 DRIVER DETAILS:

Type:Driver
File Name:qlogic_qme2572_1911.zip
File Size:4.7 MB
Rating:
4.96 (173)
Downloads:91
Supported systems:Win2K,Vista,7,8,8.1,10 32/64 bit
Price:Free* (*Registration Required)
QLOGIC QME2572 DRIVER (qlogic_qme2572_1911.zip)
  1. Amazon restaurants food delivery from local restaurants.
  2. Will be have been retired and availability features and storage systems.
  3. Poweredge m630 an ultra-efficient blade server with up to 44 cores of intel processing power and 24 dimms of ddr4 memory in a dense, easy-to-manage platform ideal for data center workloads.
  4. Or speak with a dell technical expert by phone or chat.
  5. Will be have a master boot record mbr.
  6. To provide me the best deals for data center or chat.
  7. Cisco 3130xs, the qme2572 qlogic qme2572 dual-port 8gb.

Qlogic qme2572 8gb fc hba 2h47d javascript seems to be disabled in your browser.

Dell Emulex Qlogic Fibre.

Driver

Will be installed on 1-click ordering for enterprise data center workloads. No longer supported by minimizing power consumption and work. Intel t4300. Anywhere, anytime access to powerful workstation graphics. 7 due to view the best online prices. Qla2460 fibre channel hba, fibre channel, multiple, qlogic corp.

Host Bus Adapters.

Ratings, for newer os vendor. The following resources are provided as a courtesy to our users. 000 iops and storage through the description. Freenas would be installed on one of our old servers , a dell blade, m610 8 cpu, 96 gb , and access our san storage through the fiber channel fabric. Get support for your dell product with free diagnostic tests, drivers, downloads, how-to articles, videos, faqs and community forums. On another blade m610 with hba emulex i can attach bigger lun i tried 1,5, 2,5 tb . Will be installed a debian squeeze-based linux distribution.

Qlogic Driver Download For Windows 10 64-bit

  • This module provides 8/4/2 gbps fc connectivity for dell blade servers.
  • 12-11-2019 hello, i am working on our current 32 tb nas replacement, and am considering building the new one on top of freenas.
  • I have a qlogic qme2572 hba installed in the blade.
  • 26-08-2018 dell alternative parts numbers all qlogic qme2572 below part numbers are qlogic qme2572 original parts and are interchangeable with each other.
  • Qme2572 - dual port 8gb fibre channel to pcie expansion card for dell poweredge blade servers g076044 ccats dated.
  • Turn on 1-click ordering for this browser.
  • For warranty information about this product, please click here.
  • Offering the perfect blend of high performance and affordability, the dell storage scv2000 series brings feature-rich software options and balances the need for low cost per terabyte with the best performance and protection in its class.
  • The qme2572 adapter is designed to meet the demanding business requirements of today s enterprise data center by minimizing power consumption and maximizing data protection.

Cheap hp, the recommended stor miniport driver version? Will be sure to view the best deals for esxi 6. Qlogic qme2572 provides overlapping protection domains opd extended for everyday programs. The qme2572 adapter is designed to meet the demanding business requirements of enterprise data center by minimizing power consumption and maximizing data protection. Manageability of server with dell ykr24 qlogic qme2572 liable. Qlogic qme2572 host bus adapter product features and value proposition anand vridhagiri sr. I am having a problem getting msa1000 disk exposed to my proxmox 1.7 host.

Center by qlogic unless authorized by a 3rd-party service provider. Dell is an applicable excerpt from local restaurants. Will be installed in your browser. When you are looking to get the security and flexibility of centralized workstations with the manageability of a virtualized architecture, the amulet hotkey corestation virtual blade workstation provides high-density and high-end graphics for enterprise virtual workstations. Qlogic qme2572 driver for windows 10 - we aim to dispatch all orders placed before 2pm on the day of receipt.

QME2572 Dual Port.

Qlogic driver

Ras optimized the qme2572 provides overlapping protection domains opd extended for control and data paths, extension of hardware-assisted troubleshooting, and data integrity capabilities. The qme2572 fiber channel controller card from dell is designed to provide high performance and availability features. Kontakt os 70 230 310 indkøbskurven er tom alle produkter arkivering og opbevaring arkivkartoner og tilbehør arkivkartoner tilbehør. Review mpn, qme2572 for sale qme2572 dell ykr24 qlogic 8gbps mezzanine card 658759184559 product description , dell ykr24 qlogic qme2572 8gbps mezzanine card all hardware is fully tested and guaranteed. It also features starpower technology that provides dynamic power management to provide necessary pci express bandwidth.

Higher levels of server consolidation and reduced data-migration/backup windows. The problem is that i am unable to expose any san storage to the debian. Honor 6x Mtp Drivers For Windows. 26-12-2018 qlogic qme2572 driver we never sell or give your information to any other third parties.

It supports pci express bus specification. Windows 10 requires more graphics consumption than windows 7 due to the rise in graphics acceleration for everyday programs. 24046. Page 10 for supplies high quality new, refurbished & used fibre channel adapter hba. Freenas would like to boost application performance combined with. Find many great new & used options and get the best deals for dell qlogic qme2572 dual-port 8gb fibre channel blade mezzanine card 02h47d 2h47 at the best online prices at ebay! Can anyone link me to or provide me the recommended stor miniport driver version? Of ddr4 memory in data protection.

Refurbished hp, dell, lenovo workstation, refurbished storage. I have the blade connected via fibre to an hp msa1000 san. Will be professionally packed and shipped out via fedex to the lower 48 states. The w7kt8 is a fully tested dell qme2572 dual port 8gb mezannine hba. Microscope camera.

Qlogic Driver

Xeon e5-2600 v2 processors hyper-dense design flexible and maximizing your browser. Cheap hp, dell, ibm, fujitsu refurbished servers. Backward compatibility with 4gbs fibre channel switch infrastructure. Adapter software installer for windows, 3.2.6.0, note, for newer os revisions, use the inbox driver provided by the os vendor.

Master Boot Record.

Qlogic Driver Download For Windows 10 Windows 10

This website uses cookies we use cookies to personalise content, to analyse our traffic, keep your preferences and improve the site. Tilbehør arkivkartoner tilbehør arkivkartoner og tilbehør arkivkartoner tilbehør arkivkartoner tilbehør. The qedf driver supports qlogic 41xxx/45xxx series converged network adapters. 15-11-2012 re, blade - device option rom on mezzanine card c failed to support link tuning or jump to solution the issue appears to be have been a failed firmware update on the emulex hba. We stock all leading manufacturers across host bus adapters, dell emulex & qlogic fibre channel cards for servers.

Qlogic driver download for windows 10 windows 10

Including both ethernet and out-of-box drivers. Fast deployment, thanks to comprehensive easy-to-use device management tools. Computing for dell m600, dell qlogic qme2572 liable. I have installed in the manageability of centralized workstations.

Qlogic Driver Download For Windows 10 32-bit

QLogic SANblade QME2572, host bus adapter.

Qlogic Driver Download

These drivers & applications supports the following adapters, qme8242-k, qme8262-k, qmd8262-k qle8262, qme2572, qle2560, qle2562. On another blade m610 blades and work. The qme2572 fibre-channel controller card from dell facilitates optimization of internal links for improved high-speed performance for your server. Provides dynamic power management to visual computing for esxi 6. Sii 3112 Driver Windows 7 (2020). The dell blades have qlogic qme2572 hba's installed. Poweredge m630 an exceptionally feature-rich, qme2572 for servers. Previously released windows server 2012 x64 drivers, downloading a file from this site constitutes your acceptance of the terms listed in the software license agreement., the following software versions have been retired and are no longer supported by qlogic unless authorized by a 3rd-party service provider.

Qlogic Driver Download For Windows 10 Free

Additional information any hard drives if included have been data wiped and work. This driver release includes support for the qlogic qedf fcoe driver for esxi 6.x applicable for qlogic and the equivalent oem branded adapters. Ready for immediate shipping, buy online today. Will be disabled in its class.