Qlogic SCSI & RAID Devices Driver Download For Windows

Posted By admin On 12/10/21
QLogic Corporation
IndustryComputer Networking
HeadquartersAliso Viejo, California, USA
Jean Hu (CEO)
ProductsFibre Channel adapters, converged network adapters, Ethernet adapters, iSCSI adapters, and ASICs
Number of employees
1,229 (2013)[1]
ParentMarvell Technology Group
QLogic SAN-switch with optical FC connectors installed.
  1. Buy QLogic iSCSI 1GB PCIe 2-Port 42C1772 Card QLE4062C-IBMX HBA Copper Network Card: SCSI Port Cards - Amazon.com FREE DELIVERY possible on eligible purchases.
  2. QLogic QLE8442-CU-CK Network Adapter PCI Express 3.0 x8 10 Gigabit Ethernet $371.79 QLogic 8GB HBA Host BUS Adapter Quad Port Fibre PCI-E QLE2564CK w/4 Transceivers QLE2564-CK Consumer electronics.
  3. QLogic iSCSI driver provides persistence through Flash and Open-iSCSI nodes and sendtargets databases. Discovery, Login and Logout Prior to SLES11 SP2, discovery and login to iSCSI targets was hardware offloaded and managed by the QLogic iSCSI adapter firmware.

After I have the data in this file: parted /disk1.iscsi (parted) u Unit? B (parted) print Model: (file) Disk /disk1.iscsi: B Sector size (logical/physical): 512B/512B Partition Table: gpt Disk Flags: Number Start End Size File system Name Flags 1 1048576B 8388607B 7340032B boot 2 8388608B B B ext4 3 B B 245366784B mount -o loop,ro.

QLogic QLE2562 dual port 8Gb Fibre Channel host bus adapter card.

QLogic Corporation was an American manufacturer of networking server and storage networking connectivity and application acceleration products, based in Aliso Viejo, California through 2016.[2]QLogic's products include Fibre Channel adapters, converged network adapters for Fibre Channel over Ethernet (FCoE), Ethernetnetwork interface controllers, iSCSI adapters, and application-specific integrated circuits (ASICs).It was a public company from 1992 to 2016.


QLogic was created in 1992 after being spun off by Emulex. QLogic's original business was disk controllers. This business was sold to Marvell Technology Group in 2005. QLogic had its initial public offering in 1994 and was traded on NASDAQ under the symbol QLGC.Originally located in a Costa Mesa, California building adjacent to Emulex, it competed against its parent company in the market for Fibre Channel controllers for storage area networks.[3]

QLogic acquired companies including NetXen.Integrated circuit designer Silicon Design Resources Inc. based in Austin, Texas, was acquired for about $2 million in 1998.[4]In May 2000, QLogic acquired Fibre Channel switch maker Ancor Communications for about $1.7 billion in stock.[5]Little Mountain Group, founded in 1999 and developer of iSCSI technology, was acquired in January 2001 for about $30 million.[6]The compiler company PathScale was acquired for about $109 million in February 2006.[7]Silverstorm Technologies, which designed InfiniBand products, was acquired in October 2006 for about $60 million.[8]After attempting to use PathScale for cluster computing over InfiniBand, the compiler business was sold to SiCortex in August 2006.[9]

QLogic was led by chairman H.K. Desai from 1996, who became executive chairman in 2010 until his death in June 2014.[10]In 2012, the InfiniBand products were sold to Intel for $125 million.[11]Simon Biddiscombe became chief executive in November 2010, until resigning in May 2013 after two years of falling revenue.[12][1]Prasad Rampalli became chief executive a few months later, until August 2015.Jean Hu became acting CEO again at that time.[13]

Qlogic Scsi & Raid Devices Driver Download For Windows 7

QLogic announced it was being acquired by Cavium in June 2016, for about $1 billion over its balance sheet cash.[14][15]After the deal closed in August 2016, job cuts were announced.[16]It announced it would move to Irvine, California in 2017.[2]

Cavium was acquired by Marvell Technology Group in 2018.[17]


The company makes a range of networking products for storage and converged networks. Storage networking products include Fibre Channel caching adapters, Fibre Channel adapters, iSCSI adapters and Fibre Channel switches. Converged network products include Converged Network Adapters and Intelligent Ethernet Adapters.


In 2005, QLogic acquired Troika Networks and storage virtualization products. Later in 2009, it acquired NetXen and Intelligent Ethernet Adapter products. In 2014, QLogic signed a broad technology alliance agreement with Brocade Communications Systems and acquired its fibre channel and converged network adapter business.


  1. ^ ab'Form 10-K: Annual Report for the Fiscal Year Ending March 31, 2013'. US Securities and Exchange Commission. May 15, 2013. Retrieved February 8, 2017.
  2. ^ abHannah Madans (December 5, 2016). 'QLogic will downsize as it exits Aliso Viejo and moves to Irvine in summer 2017'. The Orange County Register. Retrieved February 8, 2017.
  3. ^Andrew Pollack (July 12, 1999). 'Qlogic Gains Force In Data Transfer'. Chicago Tribune. Retrieved February 8, 2017.
  4. ^Dow Jones (August 21, 1998). 'QLogic Acquires Chip Designer, Marketer'. Los Angeles Times. Retrieved February 8, 2017.
  5. ^'Qlogic Plans To Acquire Ancor In Deal Valued At $1.7 Billion'. Chicago Tribune. May 9, 2000. Retrieved February 8, 2017.
  6. ^Scott Bekker (January 24, 2001). 'QLogic Furthers iSCSI with Acquisition of Little Mountain Group'. Redmond Magazine. Retrieved February 9, 2017.
  7. ^Ashlee Vance (February 18, 2006). 'QLogic has an Infiniband moment with PathScale buy: $109m Opteron/Xeon play'. The Register. Retrieved February 9, 2017.
  8. ^'Qlogic buys Silverstorm Technologies'. The Orange County Register. October 4, 2006. Retrieved February 8, 2017.
  9. ^Marvyn (August 2, 2007). 'PathScale compiler moves to SiCortex'. Inside HPC. Retrieved February 8, 2017.
  10. ^Chris Casacchia (June 9, 2014). 'QLogic's Desai Dies at 68'. Orange County Business Journal. Retrieved February 8, 2017.
  11. ^Whittaker, Zack. 'Intel buys QLogic's InfiniBand assets for $125 million'. ZDNet. Retrieved 2019-02-02.
  12. ^Chris Mellow (May 20, 2013). 'Flailing QLogic's boss gives up CEO, president gigs: That seat on the board? You can have that too...'The Register. Retrieved February 8, 2017.
  13. ^Chris Mellow (August 22, 2015). 'QLogic CEO is out, search for successor underway: Prasad Rampalli joins list of ex-execs 'pursuing other opps''. The Register. Retrieved February 8, 2017.
  14. ^'Acquisitions'. Crunchbase. Retrieved 2019-12-17.
  15. ^Larry Dignan (June 15, 2016). 'Cavium buys QLogic in $1.36 billion data center processor deal'. ZDNet. Retrieved February 8, 2017.
  16. ^Hannah Madans (August 30, 2016). 'QLogic to cut nearly 70 jobs following Cavium acquisition'. The Orange County Register. Retrieved February 8, 2017.
  17. ^Shilov, Anton. 'Marvell Completes Acquisition of Cavium, Gets CPU, Networking & Security Assets'. www.anandtech.com. Retrieved 2019-09-01.

External links[edit]

Retrieved from 'https://en.wikipedia.org/w/index.php?title=QLogic&oldid=1003973804'
A step-by-step example of a Linux configuration to configure iSCSI diskless booting.
These steps can also be used for diskless NFS booting.
In our instructions, we will configure and load the IBM 8247-22L server, ppc64le architecture.
The OS we will be loading will be Ubuntu 14.04.
Fedora 18, x86 architecture will act as the OS on which the image connected via iSCSI (iscsi target) will live.
It is also possible to use Ubuntu 15.04 and any other new version of Fedora - 20, 21, 22, etc.
The instruction assumes that iscsi target will be on x86 architecture, and iscsi initiator on ppc64le, Qlogic scsi & raid devices driver download for windows 10Qlogic scsi & raid devices driver download for windows 7
it is better for you if you have everything the same.
We will follow these steps:
  1. Create a disk.
  2. Set up and run iSCSI target.
  3. Install Ubuntu on a USB flash drive.
  4. Let's take the data we need from the flash drive system.
  5. Install Ubuntu on a remote iSCSI drive.
  6. Create an initrd image with iSCSI support.
  7. Let's configure the PXE server as part of the DHCP server.
  8. Let's configure the PXE server in the TFTP server part.
  9. Finally, boot from PXE via iSCSI.

Qlogic Scsi & Raid Devices Driver Download For Windows 8.1

Configuring iSCSI target

We connect our server with a network cable to the machine where Fedora is installed, let the name of the network interface be em1 here.
Also, let the IP of this machine on em1 be
On this machine, create a 10GiB container:
Configuring, connecting and launching iSCSI target:
The latter command allows access to the address, this is the address of the server we connected.
The tgtadm utility lives in the scsi-target-utils package.
If we use complex iptables rules, redirection, masquerade, do not forget to allow packet forwarding:

Hint for loopback mount

Installing the OS on a USB flash drive

Download the Ubuntu 15.04 (or other) image for our server http://cdimage.ubuntu.com/releases/15.04/release/ -- use PowerPC64 Little-Endian server install image.
* For POWER8 Little-Endian computers, such as Power Systems S8xxL Linux-only servers.
We will write this image to a USB flash drive or to a CD-ROM.
Then install the image from the CD-ROM to FLASH, or from one FLASH to another, from CD-ROM or FLASH to the hard disk.
We will need this installation in order to:
  1. After loading into it to form initrd with iSCSI support.
  2. Also, get the kernel image from here.
  3. Also, get the pxelinux.0 file from here.

Create an initrd image with iSCSI support, copy the kernel image and the necessary data

To install packages, you need to bring the OS to the Internet.

Installing Ubuntu on a Remote iSCSI Disk

In the 'Ununut' installer, you can select the option to connect extended drives.
Having selected it, you need to specify the iSCSI target name as server1:disk1.
Specify as the IP address, as the port 3260.
After which, as usual, partition the remote disk and install Ubuntu again.

Set up a PXE server

We need to configure DHCP and TFTP server.
For Fedora, the names of the packages we need are:If for some reason you raise your iSCSI 'target' to Ubuntu, then:
You can listen to all the commands going to the TFTP server like this: tcpdump -nnn -i em1 port 69
Now PXE configuration:
In arguments, the adra may need to specify console=tty0 if you see the kernel loading, but you do not see initrd starting and loading the system.
You may need to change root=/dev/sda2 if you partitioned the drive using iSCSI differently.
Previously copied to flash drive into the /out/ files
initrd.img-3.13.0-24-generic pxelinux.0 vmlinux-3.13.0-24-generic
copy to: chmod 644 /var/lib/tftpboot/.
Then we set the world-readable rights:

We load the server on PXE from iSCSI disk

In the case of the IBM servers, when they start, a boot manager named Petitboot is loaded.It scans the network and local media for download sources, in our caseour network boot with the name Linux will be displayed, here is what it will look likesettings: